I bought Mopar Skids today from the dealership. Here’s what I paid. I'm not sure if these prices are excellent, but the service guy usually cuts me a pretty good deal on parts.

Engine Skid $66.00
Transmission Skid $42.00
Transfer Skid $42.00
Fuel Tank Skid $99.00

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.

I could have sold you a gas tank skid for a whole lot less,though it's orange,dent free though.Replacing it this weekend for the Kilby while I bedline the F/R bumbers and roof rack.


I don't think you did to bad,you paid less for all 4 skids then I paid just for the gas tank skid,which I purchased in march of '02,it was $278 alone back then.

all in all pretty good prices on everything. Ya could always return the gas tank one and go snitch tjkjs might have to paint it though

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Pretty good prices. They gave you a discount. The tranny and t-case skids are $49 list and the gas tank skid is $109 or $119 or something like that. Not sure about the engine skid. I'm too lazy to check. Those are the list prices and you paid less. Good deal.

You can usually go to the dealer parts dpt and order any Mopar OEM stuff like that and ask for a discount and get 10% easy if it is a good dealer. Just ask. The best part is that it comes in on the parts truck the next morning and the dealer pays for shipping no matter what it is...... The truck comes in every day with the normal dealer parts order anyway....... They come with the bolts and zerknuts and all.

_________________
05 BLACK KJ - 42RLE & NP242
Skids, Hooks, Bent Rock Rail, Lifted, A/T's, etc.
NY and PA and Florida ONF Special Custom Organic Trail Rash

hey tjkj how much u want for the fuel skid?

_________________
2003 KJ Sport
Flowmaster Super 44
OME HD front springs, rusty's strut plate, 3 ring clevis, rusty's rear springs
JBA UCA 4.5
DTT upfront
Reese Tow hitch
ARB Bull Bar
Renegade Light Bar
HiLift jack
Crager Soft 8 15x8
Trxus MT 31x10.50/15
Coming Soon: SFA swap

Congratulations. Now put them on, hit the trails and touch them all. You will end up doing so anyway at some point... Then you'll be thankful you have them.

TL

_________________
95 YJ 2.5" RE lift and 32's, Posi-Lock, 4.10's with a Tru-Trac up front, M8000 winch, CB, gear and what have you...
RIP: 02 KJ LE

I know this has been covered a million times, but didn’t many of you recommend using carriage bolts to install the skid plates? If so, what size of carriage bolts?

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.

I just bought 2 of the skids and they came with bolts.
Good prices from what I paid.
Of course it took 2 tries to get what I wanted.

R

_________________
'06 Jeep Liberty Sport CRD with: GDE Hot Flash and Tranny Flash, ehm, Cummins fuel pump, 3" Magnaflow muff, Moog K3199's, Skids, 225-75-16 10 ply, OME springs, Euro T/C, Shift kit, Trans cooler w/thermal bypass, Bigboy bkt, Samco CAC, Brake controller, Trans temp gauge, Al's Upper Arms

Good stuff... I have all of my skids except my Trans skid... I might pick it up for that price

_________________
Have fun out there.

2003 Cactus Green Renegade w/ NP231 & NV3550
Al's 4th Gen UCAs
Custom 3.5" Lift
Rear DTT
Spidertraxed 245/75/16 Maxxis Bighorns