LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

HVAC fan not blowing...
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=30954
Page 1 of 1

Author:  jeepsterxj [ Thu Mar 27, 2008 12:16 pm ]
Post subject:  HVAC fan not blowing...

hopped in my kj this morning, and the fan is not blowing for heat or ac....

any ideas on whats up with this?

thanks in advance!

Brandon

Author:  WoodysKJ [ Thu Mar 27, 2008 1:08 pm ]
Post subject: 

Blower relay. Need a new one. Passenger side under the glove box.

Author:  Jeep Dawg [ Thu Mar 27, 2008 2:03 pm ]
Post subject: 

Yea,
Mine only blows on 3&4 AC/heat

Author:  sleeve84028 [ Thu Mar 27, 2008 10:14 pm ]
Post subject: 

Here you go: Thread on HVAC resistor replacement Get your $15.00 out and call up the dealer

Author:  jeepsterxj [ Sat Apr 05, 2008 3:52 pm ]
Post subject: 

ended up being the wires to the blower motor werent connecting properly?? weird stuff, i guess the PO was a retard and tugged on them lol... seems to be working fine now after just wiggling them

Author:  FlaJeepDiver [ Fri Apr 11, 2008 7:46 am ]
Post subject:  Recall Notice

Check the Jeep website for Recalls also check the NHTSA for Recalls I saw one for the blower motor thing. It could burst into flames or something. You will need your VIN number to check.

Author:  Jeepjeepster [ Fri Apr 11, 2008 11:31 am ]
Post subject: 

2002 has no recalls for that.

I would look into further than 'wiggling' some wires. Its not fun when it burns to the ground on the side of the hw.

Author:  sleeve84028 [ Fri Apr 11, 2008 2:35 pm ]
Post subject: 

Honestly this is the first I have read of the "loose" wire thing. That truely is a fire hazard if those connectors were to come in direct contact with each other.

Author:  jeepsterxj [ Tue Oct 14, 2008 12:59 pm ]
Post subject: 

its the connection inside the fan itself where the wires interface internally,

its prob just from moisture or the part is just junk... either or... cause i sure as heck didnt even look at the thing let alone touch it before this happened...

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/