LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Recommended tire pressure (street)
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=31029
Page 1 of 1

Author:  BeepBeepJeepJeep [ Sat Mar 29, 2008 5:59 pm ]
Post subject:  Recommended tire pressure (street)

245/75/16 Maxxis Bighorn range E tires... what do you guys recommend?

Author:  jason thompson [ Sat Mar 29, 2008 6:17 pm ]
Post subject:  Re: Recommended tire pressure (street)

BeepBeepJeepJeep wrote:
245/75/16 Maxxis Bighorn range E tires... what do you guys recommend?



30-32 PSI
same L/R as an MTR and that is what we run in them good ride and good mpg

Now if your rig is heavy ,tools ,after market skids, bumpers, ect., then I would go slightly higher but no more than say 36

Author:  Jeep4me99 [ Sat Mar 29, 2008 6:34 pm ]
Post subject: 

i was running 32psi in my mtr's of that size, then bumped them up to 36psi. gained a bit in MPG, but it did stiffen up the ride a bit too.

Author:  tjkj2002 [ Sat Mar 29, 2008 6:44 pm ]
Post subject: 

When I ran a 245/75 load range "E" tire it was best at 38-40psi for wear and ride on my KJ(that was when it was totally stock).

Author:  raceinfan [ Sat Mar 29, 2008 7:10 pm ]
Post subject: 

I run my BFG AT's & my Super Swamper IROKS at 38

Author:  Jeepjeepster [ Sat Mar 29, 2008 7:23 pm ]
Post subject: 

I run 36psi at all times.

I put air in them when it was around 50F out. Last night it was 30F and they dropped down to 33psi but went back up to 36psi today since it got up to 55F.

Always put air in the tires when they are cold. Do not do it right after you driven the Jeep since the pressure will drop as the tire cools off.

Author:  jason thompson [ Sat Mar 29, 2008 7:36 pm ]
Post subject: 

raceinfan wrote:
I run my BFG AT's & my Super Swamper IROKS at 38




I pray that those are the 245/75 Irok ND's and not the larger radial or bias Iroks
because I run my little bias LTB's at 25psi that would be like riding on 4 bricks

Author:  dloc_jeep_KJ [ Sat Mar 29, 2008 11:01 pm ]
Post subject: 

i run ~38-40 in my MTRs on the street but im always haling aroung 400lb of metal in the back.

Author:  tjkoen01 [ Mon Mar 31, 2008 9:13 pm ]
Post subject: 

I shoot for 38, seems to work well for me.

Author:  CD [ Mon Mar 31, 2008 10:25 pm ]
Post subject: 

I run my STT's at 38/39psi.

Author:  Joe Jeeper [ Mon Mar 31, 2008 10:57 pm ]
Post subject:  Pressure

I ran my MTR's at 32 psi, I'm running these BFG's at 34 psi. Joe :mrgreen:

Author:  jinstall [ Tue Apr 01, 2008 1:44 am ]
Post subject: 

245/70/16 at 40-42psi cold.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/