I am going to swap my driver's side Axle shaft tis weekend and have never done one before. Does anyone have any tips or tricks for this? Is the 35mm axle nut socket just your average socket or do I need to buy a certain type?

_________________
Moab Native
2005 Bright Silver Liberty Sport 4X4
Moab Wheels and 245/75/16 BFG A/T
Rusty's Springs
Al's 4.5 A Arms
3 Ring clevis, 1 ISO
Rancho RSX front and rear

I came in to this thread expecting something totally different

_________________
Have fun out there.

2003 Cactus Green Renegade w/ NP231 & NV3550
Al's 4th Gen UCAs
Custom 3.5" Lift
Rear DTT
Spidertraxed 245/75/16 Maxxis Bighorns

there is a write up in the tech section, and someone just did it in the 4x4 section.

the 35mm will not be with your average sockets, it will be with the axle nut sockets and will be 1/2 inch drive.

Have fun!

_________________
L.O.S.T. #225019
2003 Sport 4x4
Patriot Blue w/ trail rash
Flex-Zilla 4" Lift
TrailRash hi-lift mounts
Other stuff you wish you had