| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| axle truss/skid http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=3218 |
Page 1 of 1 |
| Author: | the1jferg [ Thu Nov 03, 2005 10:54 pm ] |
| Post subject: | axle truss/skid |
Hey, How about this for my Dana 35 ? (The Confer Super Skid truss) I'm sure it would not hurt the 8.25 either. http://www.fourwheeler.com/techarticles/129_0401_trus/ http://www.conferr.com/new_catalog/ Can't wait til the Auburn ECTED is released for my axle. |
|
| Author: | FreedomKJ [ Fri Nov 04, 2005 1:03 am ] |
| Post subject: | |
An over-the-axle truss like that won't work on the KJ because of where the upper control arm mounts to the axle. I suppose you could do some heavy duty suspension and axle modification, but I don't think it'd be worth it unless you're going to straight axle the Jeep and run 35s on it. At that point I don't think you'd want to be running a D35 (or even an 8.25) in the rear anyway. |
|
| Author: | the1jferg [ Fri Nov 04, 2005 9:57 am ] |
| Post subject: | ? |
The confer under axle truss. it don't really hurt ground clearance. Ever see how low the a-arms hang? |
|
| Author: | kevh [ Fri Nov 04, 2005 11:05 am ] |
| Post subject: | |
with a 31 or 32 inch tire being pushed by a 6cyl it isnt really needed. you just aren't able to stress the joints at the axle housing |
|
| Author: | the1jferg [ Fri Nov 04, 2005 12:23 pm ] |
| Post subject: | Flex |
I'm convinced minor tube flex is why my noslip sux so bad. Just looking for something to help strengthen till the auburn is available. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|