| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Trailer wire harness - what can I get? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=32232 |
Page 1 of 1 |
| Author: | scoobysnax [ Mon May 05, 2008 10:13 pm ] |
| Post subject: | Trailer wire harness - what can I get? |
What trailer wiring harness do I need can I get for the liberty? I have a 2004. I don’t plan on pulling any major but I’d like to have the option for something that can use trailer brakes. Do I need a 4-pin or a 7 pin? Can I set it up for both? If possible I’d like a plug in version but I can also splice wires myself so long as I can clearly figure out what’s what. I’d also like to have it permanently mounted to the hitch and not some wires that are tucked inside the Jeep and then just pulled out when I need it. |
|
| Author: | tommudd [ Mon May 05, 2008 11:01 pm ] |
| Post subject: | |
most small trailers take the 4 pin flat plug, and go to etrailers, good prices and a good product also it just plugs into the KJ rear wiring no cutting of wires |
|
| Author: | scoobysnax [ Tue May 06, 2008 9:38 am ] |
| Post subject: | |
so can the 4-pin set up control trailer brakes? Or do I need a 7-pin to do that? |
|
| Author: | tommudd [ Tue May 06, 2008 9:46 am ] |
| Post subject: | |
need 7 to do that plus the brake controller etc |
|
| Author: | JaySoy [ Tue May 06, 2008 10:21 am ] |
| Post subject: | |
I bought this exact harness from this ebay vendor and it was really easy to install and works great. It was the cheapest I could find. It came in a Reece Towpower container, I bet most 4 pin plug-and-play setups are made in the same place. http://cgi.ebay.com/ebaymotors/Trailer- ... enameZWDVW |
|
| Author: | SpankyKJ [ Tue May 06, 2008 12:55 pm ] |
| Post subject: | |
try this all in one. http://www.etrailer.com/p-118382.htm |
|
| Author: | jsc7002 [ Tue May 06, 2008 1:37 pm ] |
| Post subject: | |
SpankyKJ wrote: try this all in one. http://www.etrailer.com/p-118382.htm
i have this one and it works great but i got mine from summit racing its a little bit more there but no shipping |
|
| Author: | Sir Sam [ Tue May 06, 2008 1:55 pm ] |
| Post subject: | |
Get a 7 pin harness. You can always install a 7 pin to 4 pin converter for any trailer, but not the other way around. |
|
| Author: | ATXKJ [ Tue May 06, 2008 1:57 pm ] |
| Post subject: | |
This was a good post http://www.jeepkj.com/forums/viewtopic.php?t=1691 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|