I have some condensation build up on the inside of my front left turn signal and want to wipe it away (mainly it looks bad). Has anyone taken off the colored plastic part of the turn signal or at least know how to do so?

_________________
2008 Xterra 4x4

1986 CJ7
Lots of custom stuff...

Gone, But not Forgotten...
2003 Sport - 'Fire Engine' Red
Detours KJ Backbone
Skids
Boulder Bars
JBA 4.5 A Arms
245/75/16 Wrangler Duratracs's on Cragar Soft 8’s
Spidertrax 1.25" Spacers
Superwinch LP 8500
Frankenlifted

Should be one star-hex screw...easy removal. Just need that tool (dont know what size hex/star bit) to remove the screw and the blinker assembly will pop right out. A clip holds it on the other side. You then can slide the bulb and wires to the side to remove it from the lense. Should be good to go.

_________________
02' Frankenlifted White Sport on 31" TrXus M/Ts

89' 2 Dr. Khaki XJ- Waggy 44's, 4.88s, 35's, 3-link on 5.5" coils.

i saw the torx screw there but wasnt all that sure it would do what i wanted. i'll give it a try tonight

_________________
2008 Xterra 4x4

1986 CJ7
Lots of custom stuff...

Gone, But not Forgotten...
2003 Sport - 'Fire Engine' Red
Detours KJ Backbone
Skids
Boulder Bars
JBA 4.5 A Arms
245/75/16 Wrangler Duratracs's on Cragar Soft 8’s
Spidertrax 1.25" Spacers
Superwinch LP 8500
Frankenlifted