LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

CQUENCE Motorsports Jeep Brake Rotors/Pads Group Buy
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=33703		 Page 1 of 1
Author:  chrispitude [ Sat Jun 28, 2008 11:39 am ]
Post subject:  CQUENCE Motorsports Jeep Brake Rotors/Pads Group Buy
Hi folks,

The front rotors on my Liberty CRD need replaced, so I've been shopping around for slotted rotors. I came across Cquence Motorsports rotors:

http://www.cquence.net/index.php

On the left side, if you click on "Brake Rotors" then "Jeep" then your model, you will see applications for our vehicles. Rotors are available in several different crossdrilled/slotted configurations, in two optional finishes (they come standard with a zinc-plated finish). I have contacted the vendor and they have agreed to set up a group buy for Liberty and Grand Cherokee owners. The prices are as follows:

front PAIR - 85.00
front and rear PAIRS - 175.00
ceramic brake pads, front and rear - 90.00

Shipping is flat rate based on your location. If you buy more, shipping is a better deal:

shipping to west coast - 25.00
shipping to central - 35.00
shipping to east coast - 50.00

Here's how the group buy will work. We need ten buyers at a minimum, so I'll post on a few forums to get visibility. If you are interested, send me a personal check made out to "CQUENCE Motorsports" with a list of what you want and I'll hold onto it until the end of July. If we have ten buyers by the end of July, we're good to go and I'll send everything in to Cquence to process your orders. If not, I'll send your check back to you or shred it at your request.

If interested, email me at "chrispitude (at) gmail.com" and I'll respond with my address so you can send the item list and check. If you have questions about the products or about which shipping zone you fall in, please contact Cquence directly as I am not associated with them and probably can't answer your questions.

Image

- Chris
Author:  2006KJSPORT4x4 [ Sat Jun 28, 2008 12:53 pm ]
Post subject: 
Very interesting...will have to read up on them more and get back with you. So as I understand it the deadline for 10 is the end of July?? Good work in getting this together, hope others chime in to take advantage...

-Scott
Author:  chrispitude [ Sat Jun 28, 2008 2:32 pm ]
Post subject: 
2006KJSPORT4x4 wrote:
Very interesting...will have to read up on them more and get back with you. So as I understand it the deadline for 10 is the end of July?? Good work in getting this together, hope others chime in to take advantage...

-Scott


Hi Scott,

I can contact Cquence and see if we hit that 10 count early, I could send those in but still keep the door open for additional orders. That way, folks wouldn't need to be in such a hurry. I agree that it's only a month, but I was trying to keep a balance between giving folks a chance to buy in, but yet not making everyone wait too long to get their shiny new toys.

By the way, there was a response in the CRD section about concerns over the quality of cross-drilling. Honestly, I am not a fan of cross-drilling unless you have simply massive rotors, you are racing competitively, and you want/need to save weight. I don't feel that cross-drilled rotors for street use buys you anything except "a certain look." However, I am a big fan of slotting as it provides improved pedal feel and water wiping in heavy rain. This is what I am after.

- Chris
Author:  CM [ Sat Jun 28, 2008 5:30 pm ]
Post subject: 
This looks like a good deal!! Can you get just slotted rotors or is the deal only for the slotted and drilled? Never really been a big fan of crossdrilled rotors, there just to likely to crack in my experience.
Author:  chrispitude [ Sat Jun 28, 2008 6:12 pm ]
Post subject: 
Hi CM,

This is for any style you want. They have several styles of slotting only, drilled only, and combinations of both. Personally I am going for a simple four slot design, front and rear pairs, and nothing more. If you go to their online store and go to the Jeep/Liberty section, you'll see the list of available rotor styles.

- Chris
Author:  chrispitude [ Tue Jul 22, 2008 3:59 pm ]
Post subject: 
July is almost over. To let everyone know, I have not received any emails yet so unless there is a last minute rush of interest, this group buy is likely to fall through.

- Chris
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/