LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Removing rear wheel well liner
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=34194
Page 1 of 1

Author:  CD [ Wed Jul 16, 2008 11:37 pm ]
Post subject:  Removing rear wheel well liner

For those that have removed them, will I gain much room on the inside wall. I can push mine a little but so I'm thinking there my be 5mm in it.

Author:  04jeepkj [ Thu Jul 17, 2008 8:46 pm ]
Post subject: 

I removed mine and cut down on the tire rub alot. I have 265/75/R16s stuffed under there and to me its worth it. . . However if you decide not to remove them a few self tapping screws should do the trick.

Author:  Joe Jeeper [ Thu Jul 17, 2008 10:48 pm ]
Post subject: 

The fuel pipe is on the driver's' side, no can do. Get Moab Wheels than no issue!

Author:  daspes [ Thu Jul 17, 2008 11:43 pm ]
Post subject: 

Joe Jeeper wrote:
The fuel pipe is on the driver's' side, no can do. Get Moab Wheels than no issue!

Actually, I had all kinds of rubbing in the rear when stuffing my 265's on Moabs. The lip would chew the sides of my lugs all to heck. After switching to a 16x7 Soft 8, the tire just clears the lip when the suspension is compressed.

Author:  CD [ Fri Jul 18, 2008 4:00 am ]
Post subject: 

Joe Jeeper wrote:
The fuel pipe is on the driver's' side, no can do.


Interesting .... that's good to know.

Quote:
04jeepkj

I removed mine and cut down on the tire rub alot. I have 265/75/R16s stuffed under there and to me its worth it. . . However if you decide not to remove them a few self tapping screws should do the trick.


Sounds like I should have a look, any contact with the feul line that you've noticed.

Author:  Fouros [ Fri Jul 18, 2008 7:04 am ]
Post subject: 

passenger side in aus cd

Author:  04jeepkj [ Fri Jul 18, 2008 8:52 pm ]
Post subject: 

CD wrote:
Joe Jeeper wrote:
The fuel pipe is on the driver's' side, no can do.


Interesting .... that's good to know.

Quote:
04jeepkj

I removed mine and cut down on the tire rub alot. I have 265/75/R16s stuffed under there and to me its worth it. . . However if you decide not to remove them a few self tapping screws should do the trick.


Sounds like I should have a look, any contact with the feul line that you've noticed.


No problems as of yet. I am running stock 5 spoke graphite rims, R16s.

Author:  rangerd77 [ Fri Jul 18, 2008 9:24 pm ]
Post subject: 

nor probs for me as for i am running a 31x11.50x15 and they dont even go in the wheel well, but i do have a prob witht hem rubbing on the flare, which i am about to remove due to frustration.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/