Ah yes, But here's a trivia question for ya....
What size wrench do they take AFTER the chrome caps fall off?
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Lugnut size? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=34292 |
Page 1 of 1 |
| Author: | loosvelt [ Sun Jul 20, 2008 10:00 pm ] |
| Post subject: | Lugnut size? |
What is the thread and hex of our KJ lugnuts? 1/2-20 thread, 13/16" hex? |
|
| Author: | tjkj2002 [ Sun Jul 20, 2008 10:28 pm ] |
| Post subject: | Re: Lugnut size? |
loosvelt wrote: What is the thread and hex of our KJ lugnuts? 1/2-20 thread, 13/16" hex? The OEM lugnuts is 1/2-20 and take a 3/4" socket.They make many aftermarket ones that either take a 3/4",13/16",or 7/8" socket.
|
|
| Author: | jeepkj02 [ Mon Jul 21, 2008 8:38 am ] |
| Post subject: | |
Mine take a 19mm. |
|
| Author: | DryBones [ Mon Jul 21, 2008 11:02 am ] |
| Post subject: | |
jeepkj02 wrote: Mine take a 19mm.
X2 '05 with 6 spoke 17" rims |
|
| Author: | Sir Sam [ Mon Jul 21, 2008 11:19 am ] |
| Post subject: | |
jeepkj02 wrote: Mine take a 19mm.
19mm = 3/4" |
|
| Author: | tjkj2002 [ Mon Jul 21, 2008 5:01 pm ] |
| Post subject: | |
Sir Sam wrote: jeepkj02 wrote: Mine take a 19mm. 19mm = 3/4" |
|
| Author: | Cacher123 [ Mon Jul 21, 2008 5:46 pm ] |
| Post subject: | |
Ah yes, But here's a trivia question for ya.... What size wrench do they take AFTER the chrome caps fall off?
|
|
| Author: | jeepkj02 [ Mon Jul 21, 2008 5:53 pm ] |
| Post subject: | |
Cacher123 wrote: Ah yes, But here's a trivia question for ya....
What size wrench do they take AFTER the chrome caps fall off? Just replace them with some decent lug nuts, like these: Summit Racing |
|
| Author: | tjkj2002 [ Mon Jul 21, 2008 6:15 pm ] |
| Post subject: | |
Cacher123 wrote: Ah yes, But here's a trivia question for ya.... Use a socket myself,but it's 18mm What size wrench do they take AFTER the chrome caps fall off?  .
|
|
| Author: | BeepBeepJeepJeep [ Sun Jul 27, 2008 7:47 am ] |
| Post subject: | |
jeepkj02 wrote: Cacher123 wrote: Ah yes, But here's a trivia question for ya.... What size wrench do they take AFTER the chrome caps fall off? Just replace them with some decent lug nuts, like these: Summit Racing These are the ones you would need if you wanted them to fit the tire iron that comes with the liberty... http://store.summitracing.com/partdetail.asp?autofilter=1&part=GOR-41187&N=700+4294919065+4294900366+4294902780+4294902779+4294755956+115&autoview=sku Which is a darn good price... I paid $6 for 3 from advance auto, and the dealer wanted $7/ea 
|
|
| Author: | JeepinMaxx [ Sun Jul 27, 2008 11:18 am ] |
| Post subject: | |
Thanks for the link - it's had to find replacement lugs with 3/4" at autoparts stores (most are 13/16). Can't find them in packs of 5 anywhere  Don't most vehicles (non full size truck) come with 5 lugs per wheel?
|
|
| Author: | tjkj2002 [ Sun Jul 27, 2008 3:52 pm ] |
| Post subject: | |
JeepinMaxx wrote: Thanks for the link - it's had to find replacement lugs with 3/4" at autoparts stores (most are 13/16). Can't find them in packs of 5 anywhere The reason why most lugs come in a 4-pack is they are counting on you to buy those pricey,and not needed,wheel locks.
Don't most vehicles (non full size truck) come with 5 lugs per wheel?I've never used a factory tire iron from the fact they are prone to rounding off the lugnuts,and that the OEM jack that came with my KJ can no longer even come close to lifting my KJ enough to get a wheel in the air. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|