Hi there. I have recently purchased a pair of TruTracs for the KJ '04 3.7 withe 3.73 ratio's from DTS and have now decided to go the full install and 4.1's while I'm at it but they are having trouble working out which ones, I have had a look at their web site and there is lots of different ones, Can anybody help out here.
Thanks in advance
Ross
P.s. I'm located in the whoop whoop downunder so its not possible to duck down to the store to have a look.

Whoop Whoop = a long bloody way from anywhere in Australian

_________________
http://www.cardomain.com/memberpage/742957
aussie KJ Lost No#150605
3" OME lift + Rancho RS9000xl's front and rear
prototype Airflow snorkel
Magnaflow cat back
265/70R16 Hankook MTRT03 on MOABS baby
4.10's and a truetrac up front
super skinks
coming soon
a myride wireless controller

mud gotta link for the website

i am interested in getting prices

_________________
http://www.cardomain.com/memberpage/742957
aussie KJ Lost No#150605
3" OME lift + Rancho RS9000xl's front and rear
prototype Airflow snorkel
Magnaflow cat back
265/70R16 Hankook MTRT03 on MOABS baby
4.10's and a truetrac up front
super skinks
coming soon
a myride wireless controller

http://www.drivetrainspecialists.com/
TT 912A553 =$547.31 rear
TT 912A585 =$391.35 front
Full install kits about $100 each
Don't know yet abvout the R&P's
I was hoping to have them in for Jambo but DTS are having trouble pointing me in the right direction as to which R&P I need.

For the front D30A front diff the only company's that make gears are Dana/Spicer(OEM gears) and Precision gears.For the rear 8.25 many makes gears,such as Precision gears,Yukon gears,Motive gears,and Guniwhine gears(<not spelled wrong as they do whine alot,do not get this brand).

Thanks TJKJ, Ihad look on precision gears web site but am still not clear which partnumbers are for the liberty dana 30a,as it jost says dana 30.
Thanks again.

You need to call them to get trhe D30A gears,they do not list them on there web site.Reider Racing can get them also(both Dana/spicer and Precision gears),but again you need to actually call them to order or get part #'s.

I have spoke to Reider Racing and they don't have any in stock and am waiting to hear back from Midwesttruck.
The part number for Precision Gears is 30D/410 L for the front and C83/410 for the rear, if anyone can put me onto any other store or place to get them would be greatly appreciated.
Regards Ross

I think http://trailquest.com/axles/KJ_Model30.shtml has the 4.10s for the front.

_________________
2003 KJ Sport
Flowmaster Super 44
OME HD front springs, rusty's strut plate, 3 ring clevis, rusty's rear springs
JBA UCA 4.5
DTT upfront
Reese Tow hitch
ARB Bull Bar
Renegade Light Bar
HiLift jack
Crager Soft 8 15x8
Trxus MT 31x10.50/15
Coming Soon: SFA swap