Link to RL instructions Needed

WoodysKJ · **Posted:** Sat Aug 30, 2008 10:16 am

Anybody have the Link Marty has on his website for his skinks install instructions?

Rock Lizard · **Posted:** Sat Aug 30, 2008 1:28 pm

http://www.rocklizardfabrications.com/i ... s_05kj.htm
http://www.rocklizardfabrications.com/instructions.htm

WoodysKJ · **Posted:** Sat Aug 30, 2008 4:44 pm

Thanks Marty.

Just got the Skinks painted with 2 coats of POR-15. 2 coats of HARDNOSED POR-15 next then they get mounted. Those plastic quarter moldings look like they have to get lost. Thats why I need the instructions again.

These things will go on with the plastic still there?

LostEddie · **Posted:** Sat Aug 30, 2008 10:06 pm

The plastic stays and looks good. Pictures included in install thread below.

http://www.lostjeeps.com/forum/phpBB3/vie ... ht=#277248

dieselenthusiast · **Posted:** Sat Aug 30, 2008 10:12 pm

WoodysKJ wrote:

Thanks Marty.

Just got the Skinks painted with 2 coats of POR-15. 2 coats of HARDNOSED POR-15 next then they get mounted. Those plastic quarter moldings look like they have to get lost. Thats why I need the instructions again.

These things will go on with the plastic still there?

Did you brush the PRO-15 on or spray it on?

WoodysKJ · **Posted:** Sun Aug 31, 2008 10:25 am

dieselenthusiast wrote:

WoodysKJ wrote:

Thanks Marty.

Just got the Skinks painted with 2 coats of POR-15. 2 coats of HARDNOSED POR-15 next then they get mounted. Those plastic quarter moldings look like they have to get lost. Thats why I need the instructions again.

These things will go on with the plastic still there?

Did you brush the PRO-15 on or spray it on?

After all the degreasing and metal prep (had good warm temps and high humidity which, believe it or not actually makes it dry FASTER) I brushed on two coats. Looks great as is, but the POR-15 IS UV susceptible and is not chip resistant. The Hard-Nosed paint is near BULLET proof. I put some on a fairlead as a test and I can't even chip it with a BFH.

Hard-Nosed goes today. Humidity will help it cure too. Only draw back to the Hard Nosed is that it can take a while to fully cure. Upto 2 weeks in cool dry weather. Don't have that now.

WoodysKJ · **Posted:** Sun Aug 31, 2008 10:25 am

dieselenthusiast wrote:

WoodysKJ wrote:

Thanks Marty.

Just got the Skinks painted with 2 coats of POR-15. 2 coats of HARDNOSED POR-15 next then they get mounted. Those plastic quarter moldings look like they have to get lost. Thats why I need the instructions again.

These things will go on with the plastic still there?

Did you brush the PRO-15 on or spray it on?

After all the degreasing and metal prep (had good warm temps and high humidity which, believe it or not actually makes it dry FASTER) I brushed on two coats. Looks great as is, but the POR-15 IS UV susceptible and is not chip resistant. The Hard-Nosed paint is near BULLET proof. I put some on a fairlead as a test and I can't even chip it with a BFH.

Hard-Nosed goes today. Humidity will help it cure too. Only draw back to the Hard Nosed is that it can take a while to fully cure. Upto 2 weeks in cool dry weather. Don't have that now.

MtnRunner · **Joined:** Wed May 28, 2008 8:32 pm **Posts:** 89

i will own a set of super-skinks and a komodo bumper. oh yes, they will be mine...

Link to RL instructions Needed

Who is online