| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Expert question http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=36436 |
Page 1 of 1 |
| Author: | MP Jeeper [ Thu Oct 02, 2008 2:35 pm ] |
| Post subject: | Expert question |
Easy question but no margin for error here so no guestimates! i need to identify the "signal" wire for the MAP sensor. Specifically, which wire carries the signal from the MAP sensor to the ECU. Thanx in advance! |
|
| Author: | tjkj2002 [ Thu Oct 02, 2008 2:49 pm ] |
| Post subject: | |
It is the dark green/red wire coming off the MAP sensor(pin 1) and goes to the C2 connector on the PCM(pin 23). |
|
| Author: | JL Rockies [ Thu Oct 02, 2008 3:00 pm ] |
| Post subject: | |
yeah, I guestimate he's right |
|
| Author: | MP Jeeper [ Thu Oct 02, 2008 3:18 pm ] |
| Post subject: | |
JL Rockies wrote: yeah, I guestimate he's right
OKAY . . . i'll accept that guestimate. Thanx for the answer TJKJ. Greatly appreciate it! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|