| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| What kind of socket is needed to remove hub bearings? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=3659 |
Page 1 of 1 |
| Author: | USAFCOP [ Wed Nov 23, 2005 5:12 pm ] |
| Post subject: | What kind of socket is needed to remove hub bearings? |
What kind of socket is needed for the removal of the hub bearings? the bolt head looks real weird, An 11mm wrench fits, but it has 6 rounded faces with detents between. |
|
| Author: | Eddo [ Wed Nov 23, 2005 5:17 pm ] |
| Post subject: | |
I think you need a set of female torx for them. Something like these http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... gory=20773 |
|
| Author: | USAFCOP [ Wed Nov 23, 2005 6:16 pm ] |
| Post subject: | |
yep, that looks like it is what I need, I did not even know there was a such thing as reverse torx!? Thanks Eddo |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|