LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Fabrication question...
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=36696		 Page 1 of 1
Author:  jeepsterxj [ Sun Oct 12, 2008 10:32 am ]
Post subject:  Fabrication question...
first off, i dont know why but i have the hardest time remembering what diff's came in the different model jeeps...


Is it possible to convert a KJ to a solid front axle? I got into a convo about this last night... of course its possible anythings possible with a a grinder, welder, and some steel stock... but how hard would this be???


Also is this the reason why the liberty cant be lifted higher than 2 inches (or about that) ?
Author:  trailman [ Sun Oct 12, 2008 10:44 am ]
Post subject: 
http://www.lostjeeps.com/forum/phpBB3/viewforum.php?f=73
Author:  jeepsterxj [ Sun Oct 12, 2008 10:47 am ]
Post subject: 
:oops:

oops... sorry didn't know that there was a huge section on this haha
Author:  JJsTJ [ Sun Oct 12, 2008 11:10 am ]
Post subject: 
Somebody needs to get out and explore the forum some more..... :wink:
Author:  Fulltimer [ Sun Oct 12, 2008 11:38 am ]
Post subject: 
jeepsterxj wrote:
:oops:

oops... sorry didn't know that there was a huge section on this haha


Don't worry about it. There is a LOT of stuff on here. Sometime when your bored with nothing to do just set down and go through the board. You just might be surprised at what you find.

As far as the lift goes...it does vary on the amount of lift you get. My lift gave me 3" and the 32" tires gave me another 1.5" of lift. Then the lift settles down some so I probably have just 3".

Terry
Author:  jeepsterxj [ Tue Oct 14, 2008 12:52 pm ]
Post subject: 
JJsKJ wrote:
Somebody needs to get out and explore the forum some more..... :wink:



i know i know :(


sometimes the coffee gets to me and i get ancy, so im gonna blame it on the caffeine haha
Author:  JJsTJ [ Tue Oct 14, 2008 10:26 pm ]
Post subject: 
jeepsterxj wrote:
JJsKJ wrote:
Somebody needs to get out and explore the forum some more..... :wink:



i know i know :(


sometimes the coffee gets to me and i get ancy, so im gonna blame it on the caffeine haha


Thats the excuse I use for almost everything.... I blame either not enough coffee or too much coffee depending on the circumstances. :shock:

:lol:
Author:  ATXKJ [ Wed Oct 15, 2008 10:50 am ]
Post subject: 
http://www.thinkgeek.com/caffeine/

the key is to stabilze the caffeine level - it's when you drop down that it's a problem..... :) :) :)
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/