depends on I.D. size, but I have before used a jig saw and metal cutting blade and cut 2 or three places around then pryed them out. PITA any way you do them
Good Luck
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Steel inserts in rubber bushings http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=36780 |
Page 1 of 1 |
| Author: | callaway [ Wed Oct 15, 2008 2:34 pm ] |
| Post subject: | Steel inserts in rubber bushings |
Anyone have any good suggestions for removing the steel inserts from rubber shock bushings? |
|
| Author: | tommudd [ Wed Oct 15, 2008 2:52 pm ] |
| Post subject: | |
depends on I.D. size, but I have before used a jig saw and metal cutting blade and cut 2 or three places around then pryed them out. PITA any way you do them Good Luck
|
|
| Author: | callaway [ Wed Oct 15, 2008 2:56 pm ] |
| Post subject: | |
It wasnt fun to do, but the jig saw worked. thanks 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|