Evic TPMS tire sensors

KJ04 · **Posted:** Tue Dec 02, 2008 10:24 pm

what's the worst case senario if I run a set of wheels with just plain rubber stems. Will I get constant chimes, bells, whisles,ect. or will low pessure lights stay on. I can deal with a light ,but not noises!

Thanks guys.

Jeepjeepster · **Posted:** Tue Dec 02, 2008 10:35 pm

Mine dinged once at start up and that was it.

It also said 'sensor missing' or something like that. Had to hit the C/T or STEP button and away it went till you started up again.

KJ04 · **Posted:** Wed Dec 03, 2008 7:13 am

Jeepjeepster wrote:

Mine dinged once at start up and that was it.

It also said 'sensor missing' or something like that. Had to hit the C/T or STEP button and away it went till you started up again.

Thanks Jeepster,
Do you have the overhead EVIC that shows the actual air pressure for each tire?

meh_kick · **Posted:** Wed Dec 03, 2008 2:13 pm

I have the overhead like you Nick (I'm pretty sure it's the same as Jeepster's too).

It will ding once at start up and show "Bad/Missing Sensor" error. You can hit the C/T button to clear it, or if you ignore, it will go away on its own.

KJ04 · **Posted:** Wed Dec 03, 2008 5:29 pm

Thank you Guys!

Jeepjeepster · **Posted:** Wed Dec 03, 2008 5:29 pm

Yup, mine shows the PSI of each tire on the evic..

Evic TPMS tire sensors

Who is online