Part number needed for 06 KJ!

MTB_TDI · **Posted:** Sun Dec 07, 2008 12:33 am

Can someone help me get the part number for this part?

I am missing three of them. I have been waiting a couple months for the dealer to get me the parts and they can't find a part number for me.
Here is a pic of one of the missing plugs: This is of the front door opening.

Any help would be greatly appreciated.

Guest · **Posted:** Sun Dec 07, 2008 1:08 am

Have you considered going to a hardware store and getting a like-sized rubber grommet instead?

Jeepjeepster · **Posted:** Sun Dec 07, 2008 2:55 am

I have never seen a liberty with those holes. Im not sure it came from the factory with those.

Have you ever had it sprayed with that oil during the winter months? Some people get that done and they drill holes all over the place so they can spray oil in them.

That one on the front door looks like its setting up for rust already.

snowsport · **Joined:** Tue Oct 18, 2005 11:52 pm **Posts:** 1211

I'd want to get some primer on those before you plug them. Just use a Q-tip with primer on it. Or even undercoat, anything to protect the bare metal. Let it dry well, then plug them.

MTB_TDI · **Posted:** Fri Dec 12, 2008 2:13 pm

Apparently the previous owner had the Ziebart rust protection done to it. I will have to put some other plugs in ther. I have already pulled the plugs and painted them. Thanks guys.

PS. We don't have anyone in the state that does this system. That explains why no one knew what it was.

jerbacher · **Posted:** Fri Dec 12, 2008 2:30 pm

there used to be a site that had all the parts diagrams for all years of the kj online in pdf format. i downloaded them all, so i dont remember the link. however, i uploaded the one for 05 (should be the same for 06, its all i have here at work!) to my idisk. LINK EDITED OUT! Its a huge document, but anything you need is in there.

im not going to leave this link up for long, so let me know when you've downloaded it so i can take that link off the site. i dont want tons of spam on that disk... :roll:

MTB_TDI · **Posted:** Fri Dec 12, 2008 2:37 pm

I have that file. Thanks!!!

jerbacher · **Posted:** Fri Dec 12, 2008 2:40 pm

MTB_TDI wrote:

I have that file. Thanks!!!

no prob

Part number needed for 06 KJ!

Who is online