If you've replaced this, here's a couple questions.
The oil light has flickered on briefly on several occasions. Likely it's the sender switch.
1. Does the new one look like the picture below ? THis picture happens to be from Standard Motor Products., but looks like NAPA's picture, etc. The reason I ask is because all the catalogs describe it as a sender "with gauge." Of course there is an idiot light, not a gauge. Immaterial ?
2. What fits on it to remove it ? Socket size ? Does a deep socket fit over it ? I'd go ahead and get the new one and see what it will need except for my uncertainty above about if it is the right part or not.
3. Do you know what threads it has ? One source called it a 1/8 NPT, another a metric M10. If it's a 1/8 I can hook up a mechanical gauge while i have it out, to see what the actual pressure is . If it's metric I'll need a different adapter.
4. If I get these answers, I'll decide what switch to get. If it's not clear, I may just go with a dealer part.
Thanks,
