LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

stock UCA and frankenlift
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=38288		 Page 1 of 1
Author:  colts_kj [ Tue Dec 16, 2008 5:53 pm ]
Post subject:  stock UCA and frankenlift
Im going to start one of my little piggy banks and i need to know how much to put back each time and how often.
I was wondering if many ppl ran the lift without al's A arms or if it could be done
Author:  tommudd [ Tue Dec 16, 2008 5:59 pm ]
Post subject: 
Not a Franky but just as high and I ran stock arms for about 70,000 miles and they are still tight and useable, just had an opportunity to buy Als and did. Also a good ..repeat good, alignment person can take the time and get the alignment pretty close to where it will not give you any wear or pulling problems with the stock arms.
Granted it maybe better with Als arms but lots have ran without

just my quarters worth
Author:  offroadohio [ Tue Dec 16, 2008 11:42 pm ]
Post subject: 
I have stock uppers on right now, just installed a frankenlift, I was able to get the alignment completely back within specs but just barely.
Author:  2006 KJ [ Tue Dec 16, 2008 11:48 pm ]
Post subject: 
i have stock ones with my franky... alignment was perfect.. or close enough to not matter rather
Author:  Inc [ Tue Dec 16, 2008 11:55 pm ]
Post subject: 
2006 KJ wrote:
i have stock ones with my franky... alignment was perfect.. or close enough to not matter rather

Me too.
Author:  colts_kj [ Wed Dec 17, 2008 10:01 am ]
Post subject: 
Sounds Good :D

That means maybe I can get it a little Faster less to save for :lol:
Author:  trailman [ Wed Dec 17, 2008 11:24 am ]
Post subject: 
I've got stock ones with the Franky. There tight and my alignment guy can get camber and toe into specs. He cannot do caster because there is no caster adjustment. All I know is that it drives straight and I'm happy with it.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/