well lets see we have 6921 registered users on here, so should be no trouble at all
( of course only a hand full maybe 50 or so would actually buy them)
to dream of 4.88s
I would be happy with 4.56s
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 4.88's for the Dana 30a http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=38493 |
Page 1 of 1 |
| Author: | Fulltimer [ Mon Dec 22, 2008 3:06 pm ] |
| Post subject: | 4.88's for the Dana 30a |
I had an e-mail from Jeremy at J.T. Parts & Accessories (see below). It was in answer to one I sent to them because they said they now carried 4.88's for the 8.25 rear differential. I told them that was only half good news for us Liberty owners, and asked them, "why don't you offer them for our Dana 30a's". Terry Yes we could make 4.88 gears to suit the front of the Liberty but I really don't think that there is a large enough demand. J.T.'s Parts & Accessories 5980 Goodwin Rd Cashmere, WA 98815 PH: 509-888-2953 ext 114 Fax: 866-399-7532 Email: jeremy@justdifferentials.com |
|
| Author: | daspes [ Mon Dec 22, 2008 3:08 pm ] |
| Post subject: | |
so what would be a "large enough demand"? |
|
| Author: | Fulltimer [ Mon Dec 22, 2008 3:09 pm ] |
| Post subject: | |
Probably in the 1,000 range. Don't really know. Terry |
|
| Author: | tommudd [ Mon Dec 22, 2008 3:52 pm ] |
| Post subject: | |
well lets see we have 6921 registered users on here, so should be no trouble at all ( of course only a hand full maybe 50 or so would actually buy them)
to dream of 4.88s I would be happy with 4.56s |
|
| Author: | jeepmedic46 [ Mon Dec 22, 2008 4:55 pm ] |
| Post subject: | |
I would like 4:56s as well 
|
|
| Author: | Inc [ Mon Dec 22, 2008 5:12 pm ] |
| Post subject: | |
What would be the pint of gears that deep in a D30a though. The tires you'd want to run would be way to much for the front end to take anyway plus how would you fit those tires? |
|
| Author: | tommudd [ Mon Dec 22, 2008 5:16 pm ] |
| Post subject: | |
Oh come on Inc we are all just dreaming here, 
now you brought us back to the real world we knew it would never happen nor would it actually work but still dreams are nice sometimes
|
|
| Author: | tjkj2002 [ Mon Dec 22, 2008 6:22 pm ] |
| Post subject: | |
4.56 gears would be better suited for 32"(265/75's) tires on a KJ,4.10's are not enough,really not enough if you live in a area like Colorado. |
|
| Author: | C co Crusader 2/127 [ Mon Dec 22, 2008 7:15 pm ] |
| Post subject: | |
id buy a set of 4.56 or 88's would save me the money and trouble of switching to a set of rock's |
|
| Author: | jeepmedic46 [ Mon Dec 22, 2008 8:25 pm ] |
| Post subject: | |
4:56 would be better for 32s. My last truck had 33s and I ran 4:56 gears. |
|
| Author: | Inc [ Mon Dec 22, 2008 8:45 pm ] |
| Post subject: | |
tommudd wrote: Oh come on Inc we are all just dreaming here,
now you brought us back to the real world we knew it would never happen nor would it actually work but still dreams are nice sometimes Sorry, I'll go back to my corner now. 
|
|
| Author: | dieselenthusiast [ Mon Dec 22, 2008 9:34 pm ] |
| Post subject: | |
Heck, I’d be happy with 4:10’s. But 4:56 gears would be a dream come true. |
|
| Author: | ChileanKJ [ Tue Dec 23, 2008 9:01 am ] |
| Post subject: | |
If we can dream then I will go for this one http://www.solidaxle.com/ProductCart/pc/viewPrd.asp?idcategory=6&idproduct=28 and change the D30A, keep it IFS but with 33. I know, I know its better to do an SFA but I'm dreaming so don't wake me. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|