LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

D30A 4.10 Gears
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=39080		 Page 1 of 12
Author:  jsc7002 [ Sun Jan 11, 2009 12:03 am ]
Post subject:  D30A 4.10 Gears
Does anyone know a place that carries 4.10 for the D30A? I tried Reider Racing a couple months ago and they sent me the wrong ones and I called back and they said they didn't have any.

EDIT: here is a complete list of the parts needed for the front rebuild and gears

Gear Kit, Ring & Pinion D30A RATIO 4.10 $245.95 part # 5066085AA

Bearing, Inner Pinion, bearing & Cup $26.95 Replaces part # 4746979

Spacer, Crush $3.95 Replaces part # 5066047

Slinger, Pinion $2.95 Replaces part # 5066052

Seal, Pinion $10.95 Replaces part # 5066053

Bearing, Axle Shaft $10.95 Replaces part # 5066056 (2 parts)

Snap Ring $1.95 Replaces part # 5066064

Seal, Axle Shaft $6.95 Replaces part # 5066066 (2 parts)

Bearing, Outer Pinion, bearing & Cup $19.95 Replaces part # 8126499

Bearing, Differential Side, Includes bearing & Cup $29.95 Replaces part # 8126500
Author:  InCommando [ Sun Jan 11, 2009 12:22 am ]
Post subject: 
http://trailquest.com

Call these folks on the phone.
Author:  jsc7002 [ Sun Jan 11, 2009 12:27 am ]
Post subject: 
ya I tried them today but they some lady answered and said I need to call back Monday, but last time I called them they were on backorder
Author:  tjkj2002 [ Sun Jan 11, 2009 12:36 am ]
Post subject: 
Don't get your hopes up for a long while if ever for a set of D30A 4.10 gears,with Chrysler in the shape it is and the fact that they no longer produce a vehicle that needs those gears(and extremely low production of those that did need them) it's up to Dana/Spicer to keep producing them on there own and if I remember correctly Dana/Spicer was still in or just emerged from chapter 11 and may go right back in.
Author:  cluelessklewer [ Sun Jan 11, 2009 12:37 am ]
Post subject: 
Check eBay. That's where I'm geting mine for my 8.25
Author:  dieselenthusiast [ Sun Jan 11, 2009 12:41 am ]
Post subject: 
I'll be shopping for a front and rear diff from a 4 cyl. KJ
Author:  tjkj2002 [ Sun Jan 11, 2009 12:44 am ]
Post subject: 
dieselenthusiast wrote:
I'll be shopping for a front and rear diff from a 4 cyl. KJ
The 4.10's for the 8.25 are real easy to get(about $180-$200 for the gear set),about 7-8 company's make them.Never go used on gears unless you absolutely need to.
Author:  cluelessklewer [ Sun Jan 11, 2009 12:46 am ]
Post subject: 
No! I'm not going used. The ones I'm getting are 180+shipping
Author:  tjkj2002 [ Sun Jan 11, 2009 12:50 am ]
Post subject: 
cluelessklewer wrote:
No! I'm not going used. The ones I'm getting are 180+shipping
But are they a known brand? Like Precision,Yukon,Motive,or Richmond? If not I'd pass,more so if the GenuWHINE gears(<misspelled for a reason,they always whine).
Author:  dieselenthusiast [ Sun Jan 11, 2009 12:50 am ]
Post subject: 
tjkj2002 wrote:
dieselenthusiast wrote:
I'll be shopping for a front and rear diff from a 4 cyl. KJ
The 4.10's for the 8.25 are real easy to get(about $180-$200 for the gear set),about 7-8 company's make them.Never go used on gears unless you absolutely need to.


Okay, then I will be shopping for a front diff only :D RL said I had to fight him for your rear set-up, and since he's bigger than me...........................well you know :lol: :lol: I will buy my own................. :shock:
Author:  tjkj2002 [ Sun Jan 11, 2009 12:51 am ]
Post subject: 
dieselenthusiast wrote:
tjkj2002 wrote:
dieselenthusiast wrote:
I'll be shopping for a front and rear diff from a 4 cyl. KJ
The 4.10's for the 8.25 are real easy to get(about $180-$200 for the gear set),about 7-8 company's make them.Never go used on gears unless you absolutely need to.


Okay, then I will be shopping for a front diff only :D RL said I had to fight him for your rear set-up, and since he's bigger than me...........................well you know :lol: :lol: I will buy my own................. :shock:
He did,did he? :lol: :lol: :lol: :lol:
Author:  InCommando [ Sun Jan 11, 2009 12:58 am ]
Post subject: 
Genuwhines stop whinning...right after they break.
Author:  tjkj2002 [ Sun Jan 11, 2009 1:00 am ]
Post subject: 
InCommando wrote:
Genuwhines stop whinning...right after they break.
So true,so true.
Author:  Diggerfreek [ Sun Jan 11, 2009 1:21 am ]
Post subject: 
dieselenthusiast wrote:
tjkj2002 wrote:
dieselenthusiast wrote:
I'll be shopping for a front and rear diff from a 4 cyl. KJ
The 4.10's for the 8.25 are real easy to get(about $180-$200 for the gear set),about 7-8 company's make them.Never go used on gears unless you absolutely need to.


Okay, then I will be shopping for a front diff only :D RL said I had to fight him for your rear set-up, and since he's bigger than me...........................well you know :lol: :lol: I will buy my own................. :shock:


I'll give you a hand :wink: I'm only a little larger than him
Author:  Rock Lizard [ Sun Jan 11, 2009 1:22 am ]
Post subject: 
tjkj2002 wrote:
dieselenthusiast wrote:
tjkj2002 wrote:
dieselenthusiast wrote:
I'll be shopping for a front and rear diff from a 4 cyl. KJ
The 4.10's for the 8.25 are real easy to get(about $180-$200 for the gear set),about 7-8 company's make them.Never go used on gears unless you absolutely need to.


Okay, then I will be shopping for a front diff only :D RL said I had to fight him for your rear set-up, and since he's bigger than me...........................well you know :lol: :lol: I will buy my own................. :shock:
He did,did he? :lol: :lol: :lol: :lol:


Gonna need something, since I am converting over to the dark side. :twisted:
Author:  Diggerfreek [ Sun Jan 11, 2009 1:34 am ]
Post subject: 
Rock Lizard wrote:
tjkj2002 wrote:
dieselenthusiast wrote:
tjkj2002 wrote:
dieselenthusiast wrote:
I'll be shopping for a front and rear diff from a 4 cyl. KJ
The 4.10's for the 8.25 are real easy to get(about $180-$200 for the gear set),about 7-8 company's make them.Never go used on gears unless you absolutely need to.


Okay, then I will be shopping for a front diff only :D RL said I had to fight him for your rear set-up, and since he's bigger than me...........................well you know :lol: :lol: I will buy my own................. :shock:
He did,did he? :lol: :lol: :lol: :lol:


Gonna need something, since I am converting over to the dark side. :twisted:


:shock: Dark Side :shock:

so your buying a KK right? :lol:
Author:  cluelessklewer [ Sun Jan 11, 2009 1:46 am ]
Post subject: 
tjkj2002 wrote:
cluelessklewer wrote:
No! I'm not going used. The ones I'm getting are 180+shipping
But are they a known brand? Like Precision,Yukon,Motive,or Richmond? If not I'd pass,more so if the GenuWHINE gears(<misspelled for a reason,they always whine).


i do believe you listed motive gears in there... so here you go:

http://cgi.ebay.com/ebaymotors/Dodge-Da ... ccessories
Author:  Rock Lizard [ Sun Jan 11, 2009 1:49 am ]
Post subject: 
Diggerfreek wrote:
:shock: Dark Side :shock:

so your buying a KK right? :lol:


Not this year, going with an 03 KJ Limited. :twisted:
Author:  Diggerfreek [ Sun Jan 11, 2009 1:52 am ]
Post subject: 
got ya :twisted:
Author:  tommudd [ Sun Jan 11, 2009 2:04 am ]
Post subject: 
Rock Lizard wrote:
Diggerfreek wrote:
:shock: Dark Side :shock:

so your buying a KK right? :lol:


Not this year, going with an 03 KJ Limited. :twisted:


Wow someones joining us KJ owners,
now I will have to make a trip out just to see what you come up with for your own! :lol: :lol: :lol:

Tom
Page 1 of 12 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/