| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Conduit nuts http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=40799 |
Page 1 of 1 |
| Author: | rob103180 [ Sun Mar 01, 2009 11:16 pm ] |
| Post subject: | Conduit nuts |
I have a '06 Liberty CRD with the stock struts. Can I use the 2" conduit lock nuts for a little more lift? I have read that they only work on after market struts. Is this because of the alignment ridge? Also, I am thinking about installing the Rancho struts. How big of a diff. is noticed from stock struts? |
|
| Author: | tommudd [ Sun Mar 01, 2009 11:19 pm ] |
| Post subject: | |
they will work on any struts you mostly use them as a gauge anyways to get both sides the same. and 2 inch is the right size Tom |
|
| Author: | ChileanKJ [ Mon Mar 02, 2009 9:05 am ] |
| Post subject: | |
You can't use it on Rancho 9000XL, you have to make the hole wider in order to pass the control valve. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|