Has anyone installed these on there KJ?
I'm interested in hearing of any problems or thoughts on these.
( I purchased these, and am having a problem.)

_________________
07 Cherokee/Liberty Limited 4x4
CRDStu 2.5" Lift, JBA's 4.5 UCA's
ARB Winch Bar, WARN XD9000 Winch
Light-Force 170's
3.7 Petrol / Auto
Sun Roof
Tow Pack,Scan GuageII
Reversing Camera
(pretty much stock, really)

So what is the problem You are having and did you talk to JBA about it yet? I have the Very extended set on my SFA, not crazy about the extended metal portion but so far so good.

_________________
99 TJ
71 C101
04 KJ
03 SFA KJ Sport
LOST JEEPS So-Cal

I have them,though bought before Marlin owned JBA.Classic Tube makes the lines.I had no issues installing mine and they gave me the firmer pedal feel I was looking for.Now for the bad,we did go through 3 sets with no luck trying install them on a JBA 4" lift.The problem was the drivers side block that bolts to the drivers side inner wheel well which was the wrong thread size to allow the OEM hard line to screw into it.Do not know if the others were right since we stopped at the first one since it did not work.We never did get them installed and and the owner just got his money back and we made a extended rear drop bracket for the rear line and the front OEM lines are plenty long enough.

In-field R&D

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.

I recieved the kit for a 2007 KJ with ABS for a 2.5 inch lift (ie 4-hose set).

Supplied the parts to jeep dealership for installation along with my CRDSTU 2.5 inch lift.

Dealer said that the front lines were shorter than the OEM Stock lines by about 50mm (about 2 inches). So they didn't install them.

The rear lines just couldn't be installed at all- Dealer said that they had the wrong fittings. Huh?....

Dam shame cause I really like the look of these lines. Very well made and "look the goods".
I'm a believer of braided lines. If you are extending the length of the lines, then I believe that they should be braided to allow less ballooning under pressure.

_________________
07 Cherokee/Liberty Limited 4x4
CRDStu 2.5" Lift, JBA's 4.5 UCA's
ARB Winch Bar, WARN XD9000 Winch
Light-Force 170's
3.7 Petrol / Auto
Sun Roof
Tow Pack,Scan GuageII
Reversing Camera
(pretty much stock, really)

I have them on with my lift. Haven't had a problem and they were installed no problem but I got mine after some people had problems.

_________________
Joe
L.O.S.T. #000391
2000 Jeep Wrangler Sport with hooks, skids, trac-lok rear.