LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Franky Brake Line Relocation Bracket
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=41428
Page 1 of 1

Author:  Fulltimer [ Sat Mar 21, 2009 4:05 pm ]
Post subject:  Franky Brake Line Relocation Bracket

Bub, in LA is working on his Franky in his work garage and needs some help pronto! He has a tubular bracket that is for relocating his brake line and doesn't know where it goes. He called to ask me but I didn't have one so I don't know.

Terry

After thought: Could be the 4" lift from Jeepin by Al instead of a Franky?

Author:  Jeepjeepster [ Sat Mar 21, 2009 4:22 pm ]
Post subject: 

If its for the 2006 liberty then the only relocation bracket I know of is for the rear brake line.

Author:  2006 KJ [ Sat Mar 21, 2009 4:55 pm ]
Post subject: 

Image

Author:  Inc [ Sat Mar 21, 2009 5:03 pm ]
Post subject: 

So where does it go?????

Author:  2006 KJ [ Sat Mar 21, 2009 6:41 pm ]
Post subject: 

:lol:

Author:  Fulltimer [ Sat Mar 21, 2009 8:27 pm ]
Post subject: 

2006KJ: Thanks for the pic, that helped. He has a 2006 CRD. I called him back and explained the pic to him.

Terry

Author:  tjkj2002 [ Sat Mar 21, 2009 8:33 pm ]
Post subject: 

'06 and '07 KJ's need two rear brake line drop brackets,there is two separate lines on the drivers side that need to be dropped.

Author:  2006 KJ [ Sat Mar 21, 2009 11:37 pm ]
Post subject: 

tjkj2002 wrote:
'06 and '07 KJ's need two rear brake line drop brackets,there is two separate lines on the drivers side that need to be dropped.


i've never had a problem and mine has been fully flexed (to bump stops) a lot more than one time on both sides... all i have is the frankenlift bump stops in the rear

Author:  KJ 119 [ Sun Mar 22, 2009 10:23 am ]
Post subject: 

Thanks to Fulltimer and all the responders.Full,I wish it were a 4",just the frankie.
The frankie and als arms went in yesterday.Was a nice saturday job.
OK,so I thought I was done.I put the bracket where Full explained(where 2006KJ has his)and now TJKJ says there's two?
What's the second look like and where's it go?

Thanx guys.Where else can you get help like this............LOST rocks!

Author:  Fulltimer [ Sun Mar 22, 2009 2:13 pm ]
Post subject: 

KJ 119 wrote:
Thanks to Fulltimer and all the responders.Full,I wish it were a 4",just the frankie.
The frankie and als arms went in yesterday.Was a nice saturday job.
OK,so I thought I was done.I put the bracket where Full explained(where 2006KJ has his)and now TJKJ says there's two?
What's the second look like and where's it go?

Thanx guys.Where else can you get help like this............LOST rocks!


Request from: LA to FL

Help From: KY, PA & NV

Not bad at all. Then there was one from an unknown state....THE UNKNOWN MECHANIC!

Terry

Author:  tjkj2002 [ Sun Mar 22, 2009 8:08 pm ]
Post subject: 

KJ 119 wrote:
Thanks to Fulltimer and all the responders.Full,I wish it were a 4",just the frankie.
The frankie and als arms went in yesterday.Was a nice saturday job.
OK,so I thought I was done.I put the bracket where Full explained(where 2006KJ has his)and now TJKJ says there's two?
What's the second look like and where's it go?

Thanx guys.Where else can you get help like this............LOST rocks!
From when we installed a Frankinlift on a '07 KJ.

The easy one............
Image

The other one...............
Image
Image

Author:  KJ 119 [ Sun Mar 22, 2009 10:33 pm ]
Post subject: 

Was this something that came with the kit?Or did yall fab that up?
My printout listed 1 brakeline extension bracket.Can't believe I paid thirty bucks for that thing.

Author:  tjkj2002 [ Sun Mar 22, 2009 10:38 pm ]
Post subject: 

KJ 119 wrote:
Was this something that came with the kit?Or did yall fab that up?
My printout listed 1 brakeline extension bracket.Can't believe I paid thirty bucks for that thing.
We made both,cost about $2 for both with the 2 bolts/nuts,and took about 5mins to do.

Author:  KJ 119 [ Sun Mar 22, 2009 10:48 pm ]
Post subject: 

tjkj2002 wrote:
KJ 119 wrote:
Was this something that came with the kit?Or did yall fab that up?
My printout listed 1 brakeline extension bracket.Can't believe I paid thirty bucks for that thing.
We made both,cost about $2 for both with the 2 bolts/nuts,and took about 5mins to do.


10-4 on the "I've been had".
Thanks for the pics.I'll throw a bracket on it tomorrow.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/