Anybody ever done or know if its possible to grind out a small notch on the edge of the flipper glass? I mounted my CB antenna bracket along the window and in order for me to get a 3rd screw in there I need to move some glass! (probably ok with 2 screws but I am anal about things). I already tried a recessed screw but I still catch it.

_________________
Jason
----------

Bones, try actually counter sinking the metal in your bracket and then try the recessed screw again. It may be just enough.

_________________

and if not, you can grind the glass. just don't push to hard

_________________
87 jeep cherokee, lifted
02 jeep liberty, lifted
91 bmw 318i mtechnic

GRINDING ON TEMPERED GLASS IS RISKY... I was in the autoglass bizz for about 12 yrs and have seen & have done it ... also have had it blow up on me ... in my experence the trick is to keep the glass cool .. but not too cool.. and take small amounts at a time .. I wouldnt recomend doing it , but some one else may know if a better way ...

Lots o luck

_________________
05 Limited kaki metalic
Renagade roof lights
home made cross bars
front tow points
more to come .....