| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| how do you program new remotes? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=41735 |
Page 1 of 1 |
| Author: | superj [ Tue Mar 31, 2009 12:34 pm ] |
| Post subject: | how do you program new remotes? |
anyone know how to do this? i got some new remotes since mine is broken on top but, since they are from ebay, they are not programed for my jeep. i know that if you ahve a working remote, you can make these learn your jeep but i don't know how to do it. |
|
| Author: | superj [ Thu Apr 02, 2009 10:07 pm ] |
| Post subject: | |
beuller beuller hello hello hello hello hello is there anyone listening? just nod if you can hear me. is there anyone... nevermind. anyone know the answer? |
|
| Author: | Jeepjeepster [ Thu Apr 02, 2009 10:14 pm ] |
| Post subject: | |
Read the owners manual.. Do you have an evic? |
|
| Author: | Guest [ Thu Apr 02, 2009 10:15 pm ] |
| Post subject: | |
i think you got your answer. if you post a question and nobody replies it usually means nobody knows the answer. Perhaps if you put some more specifics like what model of remote you have, a link to a webpage where you bought it, etc, then someone might be able to help you. Did you try contacting the place you bought them at? |
|
| Author: | ATXKJ [ Thu Apr 02, 2009 10:44 pm ] |
| Post subject: | |
The owners manual has the sequence - but you have to have 2 working keys and then you can program new ones - if you only have 1 working - you have to pay the dealer to program new ones |
|
| Author: | tulsa [ Fri Apr 03, 2009 7:23 am ] |
| Post subject: | Re: how do you program new remotes? |
superj wrote: anyone know how to do this? i got some new remotes since mine is broken on top but, since they are from ebay, they are not programed for my jeep. i know that if you ahve a working remote, you can make these learn your jeep but i don't know how to do it.
I am assuming that you just need to program the remote, not the keys. Do the remotes you are replacing still work? Lewis |
|
| Author: | rt_power [ Fri Apr 03, 2009 8:51 am ] |
| Post subject: | |
remotes i believe can be trained through the EVIC, not sure if you don't have one. and the chipped keys have to be done @ the dealer |
|
| Author: | superj [ Fri Apr 03, 2009 12:52 pm ] |
| Post subject: | |
ok. see i have no evic and my one current remote is working. i also have no owners manual as i just recently bought this jeep used. my keys don't apear to have chips in them. they look just like regular old keys for my old grand and regular cherokee. i have the remote, pn:04602260 aa. just a little oblongish remote with unlock, lock, pop the hatch, and panic on it. i asked the place i got it for directions on programming but htey said they do not gie the directions and i could find them on line from one of the forums or the dealer. i bought them on ebay since they were new and horribly inexpensive and i figured even if i had to go to the dealer, i would be saving money |
|
| Author: | hollysprings [ Fri Apr 03, 2009 5:46 pm ] |
| Post subject: | |
On the owners manual, you might check again in the glove box - there's a little sort-of-hidden shelf at the top where it goes. I thought I didnt have one either until I read about the shelf on here and I looked again and, what do you know, there it was. |
|
| Author: | superj [ Fri Apr 03, 2009 8:43 pm ] |
| Post subject: | |
i know about the shelf. i put my insurance card there since i have no owners manual. i do happen to own the factory manuals now also though so i guess i can see if they say anything about programming |
|
| Author: | To_The_Max [ Fri Apr 03, 2009 11:03 pm ] |
| Post subject: | |
you can look up your owners manual here http://www.jeep.com/en/owners/ |
|
| Author: | Jeepjeepster [ Sat Apr 04, 2009 12:45 am ] |
| Post subject: | |
If the key is gray then it has the chip, if its black it does not. That shouldnt matter if your programming a remote though.. Im not sure if you can program them without the evic.. |
|
| Author: | tpcosta [ Sat Apr 04, 2009 6:39 pm ] |
| Post subject: | |
I don't remember the sequence, I either found it here or in the manual. But i had one chip key that worked and a remote key ans i was able to program a new key. |
|
| Author: | tjkj2002 [ Sat Apr 04, 2009 7:58 pm ] |
| Post subject: | |
Right from the '02 Owners manual.................. To program additional transmitters Up to 4 transmitters can be programmed to your vehicle.To obtain additional transmitters,contact your authorized dealer.To program a transmitter (within 23'-50' of vehicle),preform the following procedure: 1. Gather every transmitter that is to be used with the vehicle including any transmitters that currently programmed. 2. Enter program mode: using a currently programmed transmitter; press and hold the "Unlock" button on the transmitter. Continue to hold the "Unlock" button,wait at least 4 but no longer then 10 seconds,then press and hold the PANIC button for at least 1 second.Release both buttons simultaneously. 3. Program each transmitter: All transmitters to be used with your vehicle must be programmed as follows: Press and release the "Lock" and "Unlock" buttons simultaneously,followed by a press and release of any button on each transmitter to be programmed.You will hear a chime when a transmitter has been successfully programmed. |
|
| Author: | superj [ Sun Apr 05, 2009 9:10 pm ] |
| Post subject: | |
that is what i was looking for. thank you. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|