Check out the top plate on the Insane UCA, Good idea if you ask me.. no more need to cut the bump stop .......Not saying nothing!!!!!!!

http://www.rocky-road.com/kjarm.html

_________________
“You cannot solve a problem from the same consciousness that created it."

“Learn from yesterday, live for today, hope for tomorrow. The important thing is not to stop questioning.”

good idea

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Wouldn't it be even better if they put in a 90 degree, or other angled, grease zerk fitting? Seems like it would be easeir to get to since "top plate" boxes it in. Just my $0.02.

_________________
2009 KK Limited 4x4
Jeep Green/partially dechromed/Sunroof/OEM Skids/
Gray Leather/uConnect GPS-Nav/DVD Head Rests/
MtnLuvr's Off-Road Front Winch Bumper, Heavy Duty Rock Sliders, Heavy Duty Off-Road Rear Bumper/JBA 4" AaS Lift w/UCAs/16x8's w/ 245/75R16 GY MT/Rs

Coming:

It would be a lot better ,but never mind I will keep the comment to myself, at least they are trying something on their own

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Nice idea and looks kinda good too.
But I don't know guys, I am very worried about the welded Arms. Some have had problems with the welds breaking. I would be more approved of the stamped 1 peice steele Arms.

JUST MY OPINION!

_________________
2003 KJ Sport JEEPZILLA Edition
American Flag flying high
Frankenlift removed =(
Moabs and plenty of pin striping
Flexable people don't get bent out of shape!
Current MPG 6" to a gallon
L.O.S.T. # BL065211
www.ItAtYourHome.com

If they're welded properly it won't be an issue. The welds look ok to me, personally, but I'm not professional welder.

I might pick up a pair of these sometime soon.

_________________
Randy, Apache Junction, Arizona
04 Liberty
Blown motor and extensive body damage.

Noob here. What is the benefit of these as opposed to other aftermarket arms?

_________________
2006 KJ CRD Ltd - Suncoast, GDE Eco, EGR Delete, After market T-Stat, Skid Row skids, V6 airbox, 2.5" Turbo back
2005 KJ CRD Sport-Suncoast, Transco, GDE Hot-GDE Trans, EGR Delete, Skid Row skids, V6 airbox, 2.5" Turbo back, After market S-Stat
1987 Suzuki LWB Samurai -diesel powered, custom 4 link coil suspension 38.5 SX Swampers

RRO are a direct copy of the JBA arms , except for using a different ball joint both look the same.

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited