Check out the top plate on the Insane UCA, Good idea if you ask me.. no more need to cut the bump stop
.......Not saying nothing!!!!!!!
http://www.rocky-road.com/kjarm.html
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| RRO-2 http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=42393 |
Page 1 of 1 |
| Author: | LIV42DY [ Sat Apr 18, 2009 11:57 pm ] |
| Post subject: | RRO-2 |
Check out the top plate on the Insane UCA, Good idea if you ask me.. no more need to cut the bump stop .......Not saying nothing!!!!!!!
http://www.rocky-road.com/kjarm.html |
|
| Author: | tommudd [ Sun Apr 19, 2009 12:24 am ] |
| Post subject: | |
good idea 
|
|
| Author: | MtnLuvr [ Sun Apr 19, 2009 10:09 am ] |
| Post subject: | |
Wouldn't it be even better if they put in a 90 degree, or other angled, grease zerk fitting? Seems like it would be easeir to get to since "top plate" boxes it in. Just my $0.02. |
|
| Author: | tommudd [ Sun Apr 19, 2009 10:12 am ] |
| Post subject: | |
MtnLuvr wrote: Wouldn't it be even better if they put in a 90 degree, or other angled, grease zerk fitting? Seems like it would be easeir to get to since "top plate" boxes it in. Just my $0.02.
It would be a lot better ,but never mind I will keep the comment to myself, at least they are trying something on their own
|
|
| Author: | Jeep Dawg [ Sun Apr 19, 2009 10:31 am ] |
| Post subject: | |
Nice idea and looks kinda good too. But I don't know guys, I am very worried about the welded Arms. Some have had problems with the welds breaking. I would be more approved of the stamped 1 peice steele Arms. JUST MY OPINION! |
|
| Author: | djui5 [ Sun Apr 19, 2009 4:03 pm ] |
| Post subject: | |
If they're welded properly it won't be an issue. The welds look ok to me, personally, but I'm not professional welder. I might pick up a pair of these sometime soon. |
|
| Author: | CRD Joe [ Sun Apr 19, 2009 4:08 pm ] |
| Post subject: | |
Noob here. What is the benefit of these as opposed to other aftermarket arms? |
|
| Author: | tommudd [ Sun Apr 19, 2009 4:29 pm ] |
| Post subject: | |
CRD Joe wrote: Noob here. What is the benefit of these as opposed to other aftermarket arms?
RRO are a direct copy of the JBA arms , except for using a different ball joint both look the same. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|