Jeep Dana 35's, 44's, and 60's yes, but haven't ever seen one for the 8.25. Though the axle is used in XJ's and IIRC WJ's among others, if you dig hard enough, you may find one.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Rear full floater kit??? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=43032 |
Page 1 of 1 |
| Author: | CRD Joe [ Sat May 09, 2009 5:11 pm ] |
| Post subject: | Rear full floater kit??? |
Like the locking hub thread I'm a big fan of rear full floaters. I don't like the weight of the vehicle riding on the rear axle and having a single axle bearing. Though I'm sure nobody makes a kit for the kJ does anyone make one for the 8.25"'rear end that might be in other vehicles? Axles can be made easy enough. Thanks. |
|
| Author: | daspes [ Sat May 09, 2009 5:29 pm ] |
| Post subject: | |
|
Jeep Dana 35's, 44's, and 60's yes, but haven't ever seen one for the 8.25. Though the axle is used in XJ's and IIRC WJ's among others, if you dig hard enough, you may find one. |
|
| Author: | tjkj2002 [ Sat May 09, 2009 8:14 pm ] |
| Post subject: | |
No full floater kit for the 8.25.Warn even axed the rear full floater kits for the D35-D44 long ago,to many problems with the spindles.You want a full floater a D60 or C14 should be on your list,then you might as well SFA it. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|