| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Super Skink install Procedures http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=43187 |
Page 1 of 1 |
| Author: | Fouros [ Fri May 15, 2009 9:47 am ] |
| Post subject: | Super Skink install Procedures |
i lost my distruction manual for my super skinks anybody got the procedure they can post up i just need to know where to line up the template before i start drilling |
|
| Author: | LostEddie [ Fri May 15, 2009 8:21 pm ] |
| Post subject: | |
Try This http://www.lostjeeps.com/forum/phpBB3/vie ... ht=#277248 |
|
| Author: | Fouros [ Fri May 15, 2009 10:41 pm ] |
| Post subject: | |
thanks Mate |
|
| Author: | riptricket [ Fri May 15, 2009 10:42 pm ] |
| Post subject: | |
i found that the template did not line up at all! no offense to marty, but I had to put the super skink up to the pinch weld and drill them that way! |
|
| Author: | tjkj2002 [ Fri May 15, 2009 11:13 pm ] |
| Post subject: | |
riptricket wrote: i found that the template did not line up at all! We've greatly changed the way the templates are made and are about 99% accurate now.
no offense to marty, but I had to put the super skink up to the pinch weld and drill them that way! |
|
| Author: | riptricket [ Fri May 15, 2009 11:24 pm ] |
| Post subject: | |
No offense for real dude! |
|
| Author: | tjkj2002 [ Fri May 15, 2009 11:26 pm ] |
| Post subject: | |
riptricket wrote: No offense for real dude! No offense taken,just stating a better way was found to be more accurate in making the templates is all.
|
|
| Author: | riptricket [ Fri May 15, 2009 11:33 pm ] |
| Post subject: | |
cool! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|