LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

First Oops!! Need Advice
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=43308
Page 1 of 1

Author:  tumanator [ Mon May 18, 2009 11:15 pm ]
Post subject:  First Oops!! Need Advice

So I'm installing my new radio receiver tonight.... I decide to take the harness back off to take it inside and solder it properly. Long story short my hand popped off quicker than i expected and i snapped the window wiper arm on the steering column. I think i can superglue the plastic back together none of the wires broke and everything still works, but I was wondering if anyone has an idea of how to replace one or how much they cost?

Author:  tjkj2002 [ Mon May 18, 2009 11:18 pm ]
Post subject: 

The part is about $100 or so and takes about 5 mins to change out,not hard.

Author:  tumanator [ Mon May 18, 2009 11:34 pm ]
Post subject: 

I'm a little to irked to go mess with it right now, is it just a harness to the steering column and the basically screw in though? And $100 bucks for that....ouch!

Author:  tjkj2002 [ Mon May 18, 2009 11:36 pm ]
Post subject: 

tumanator wrote:
I'm a little to irked to go mess with it right now, is it just a harness to the steering column and the basically screw in though? And $100 bucks for that....ouch!
The headlight/turn signal and wipers are all on the same part.

Author:  sharky [ Mon May 18, 2009 11:44 pm ]
Post subject:  CHECK JUNKYARDS, PRACTICALY NEW SOMETIMES ....

cheaper too..... :roll:

Author:  teckman02 [ Tue May 19, 2009 1:17 am ]
Post subject: 

do you have oem fogs if not i have a extra wiper and light switch if you want it make me an offer and it is yours send me a PM

Author:  jeepmedic46 [ Tue May 19, 2009 8:05 am ]
Post subject: 

Junk yards are good if you can find any Kjs in them.

Author:  JeepinJarhead03 [ Tue May 19, 2009 9:18 am ]
Post subject: 

it's a shot but i'd dare to guess that theres a dodge that uses the same part

Author:  tumanator [ Tue May 19, 2009 5:12 pm ]
Post subject: 

Well the super glue seems to be holding...for now. But on the better side i got my new receiver, amp, and sub woofer installed.

Author:  KCKJ [ Tue May 19, 2009 11:56 pm ]
Post subject: 

if the super glue doesn't hold, try some JB Weld. The stuff is amazing. It's an appoxy. I've used it for many of my oop's.

Author:  jeepskate [ Wed May 20, 2009 3:35 am ]
Post subject: 

The part you need is called the multifunction switch. Super easy to swap out. This place has it for an 05 for under 40 bucks. It won't let me link to the exact page, but just enter your make, model and year and "multifunction" in the keyword field:

http://www.wholesalemopar.com/parts_cat ... agodZ0072g

I bought mine from this site w/no problems.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/