LOST JEEPS :: View topic - Winch Questions

What does low and high mount mean?

Mounting it low versus mounting it high??? :roll:

Probably doesn't mean much since you're mounting it in an ARB.

Wow !! So that's what my Jeep is going to look like!! Awesome!!

I've got the same color Jeep, Chrome grill, and I've ordered a color-coded ARB bumper !!

Are you going to add driving lights or UHF antennae?

Does anyone know if a WARN XD9000 will fit in the ARB?

dirt pig wrote:

Does anyone know if a WARN XD9000 will fit in the ARB?

The XD9000 fits, I think tjkj2002 might have one???????? Either way, it's a couple steps up from the M8000................

dieselenthusiast wrote:

dirt pig wrote:

Does anyone know if a WARN XD9000 will fit in the ARB?

The XD9000 fits, I think tjkj2002 might have one???????? Either way, it's a couple steps up from the M8000................

I believe tjkj has the 9.5xp model. The XD9000 will work though.

I am on my second "Champion Power Products" 9500 pound winch.
The first one I had, I sold with my last 4X4 truck.
Even though it is is made in China, it has never left me hanging! (No pun intended!)
After many many years of trouble free usage, it was a very reliable winch.
Pays out cable well and works just fine.
I ended up buying another one just like it. (Only updated)
For what I paid for it, I could not resist buying another one. It came with two wired
hand held remotes, an extra "Anderson" type quick disconnect plug and master battery
cables, and two 12000 lbs. stainless steel snatch blocks.

Author:	dirt pig [ Fri May 29, 2009 4:14 am ]
Post subject:	Winch Questions
I've just had CRDSTU's 2.5 inch Lift installed and have just ordered an ARB Bull Bar. So now I've been considering a winch. Now, The Questions start ! Anyone reccomend a winch for a 2007 Liberty? How much Pulling Power would you reccomend? 8000lb-9000lb? What is the OE battery's Cold Crank Amps? Do I need a bigger/dual battery setup? What is your typical setup consist of? (pictures would be nice ) What does low and high mount mean? As you may have guessed, I know nothing

Author:	jsc7002 [ Fri May 29, 2009 8:45 am ]
Post subject:
How much are you looking to spend? the Smitybuilt XRC8 is only $300 and has a pull of 8,000, and the XRC10 is $430 and is 10,000 or if you want to spend more you can go with a Warn or Mile Marker

Author:	jsc7002 [ Fri May 29, 2009 8:48 am ]
Post subject:
oh and typically your winch is 1.5 the weight of your vehicle, so I would buy a minimum of 8,000 for the KJ

Author:	dirt pig [ Fri May 29, 2009 9:02 am ]
Post subject:
I don't think Smitybuilt is sold in Australia, and I'd hate to think of what the postage will be. It'll probably take it up to the price of a Warn Winch !! Although it is an option.

Author:	tjkj2002 [ Fri May 29, 2009 9:16 am ]
Post subject:
WARN is the way to go,the M8000 or the 9500XP are great choices.

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

Winch Questions http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=43640	Page 1 of 1

Author:	dirt pig [ Sat May 30, 2009 12:28 am ]
Post subject:
So.....With the responses so far; I'd have to say that not many people have a winch on there KJ's. I notice a lot of Wranglers have them. Anyone know how many CCA's the OE battery is?

Author:	icarl [ Sat May 30, 2009 2:23 am ]
Post subject:
Anyone reccomend a winch for a 2007 Liberty? In Australia, i think they sell the T-Max winches. I don't know much about them though. WARN is the number one rated off-road winch brand for reliability in North America. I like my winch, the Titan, though. It is a good bang for the buck winch, using higher quality parts than other cheap winches. And so far, as far as i know, only 1 Titan motor has failed in all of North America. Some will say WARN is the only way to go. Maybe true if you are doing extreme off-roading but I like the fact that Titan is a small Canadian company and sometimes you gotta support the little guy. But for you if you can not get a WARN in Australia you could look at the T-Max. Also, the WARN M8000 is guaranteed to fit in the ARB and you need to compare the specs on it to any other winch you want to fit in there. How much Pulling Power would you reccomend? 8000lb-9000lb? Really, If you are getting an ARB then the only choices in a winch are the smaller winches that have the solenoids that are removable or mounted not on the winch itself. These include the ones mentioned above and the WARN M8000, XD9000, 9.5XP. My winch is 12000 ibs and has a safety overload switch that automatically shuts off power at 12300 ibs to not overload the winch. The bigger the better but the M8000 will work but i wouldn't go any smaller than that. What is the OE battery's Cold Crank Amps? Not sure but I have a yellow top optima battery that is better for winches and other power accessories. Do I need a bigger/dual battery setup? No. I think usually 650 CCA is the minimum you need for the M8000. A yellow top would be good. A dual battery would be nice to have but not needed. What is your typical setup consist of? (pictures would be nice Wink ) The ARB comes complete with winch mounting instructions. What does low and high mount mean? Mounting it low versus mounting it high??? Probably doesn't mean much since you're mounting it in an ARB.

Author:	Drassis [ Sat May 30, 2009 9:48 am ]
Post subject:
I have been looking at these two winches to add to my TJM bumper, since I dont ahve the $$$ for the WARN. http://www.smittybilt.com/product/index/45.htm This one comes without synthetic for a much cheaper price too http://www.smittybilt.com/product/index/57.htm

Author:	icarl [ Sat May 30, 2009 1:35 pm ]
Post subject:
icarl wrote: What does low and high mount mean? Mounting it low versus mounting it high??? Probably doesn't mean much since you're mounting it in an ARB. I think a high mount winch allows for a longer cable and faster winch speeds and are usually used in competitions. They are also more expensive. But, you won't be able to fit one in the ARB anyways. Here is an example of a high mount.

Author:	dieselenthusiast [ Sat May 30, 2009 10:21 pm ]
Post subject:
Here's the pic request:

Author:	dirt pig [ Sat May 30, 2009 10:29 pm ]
Post subject:
Wow !! So that's what my Jeep is going to look like!! Awesome!! I've got the same color Jeep, Chrome grill, and I've ordered a color-coded ARB bumper !! Are you going to add driving lights or UHF antennae?

Author:	dirt pig [ Tue Jun 02, 2009 6:22 am ]
Post subject:
Does anyone know if a WARN XD9000 will fit in the ARB?

Author:	tomsjeep [ Tue Jun 02, 2009 8:22 am ]
Post subject:
Fit guide from ARBUSA website says it fits.

Author:	dieselenthusiast [ Tue Jun 02, 2009 9:19 am ]
Post subject:
dirt pig wrote: Does anyone know if a WARN XD9000 will fit in the ARB? The XD9000 fits, I think tjkj2002 might have one???????? Either way, it's a couple steps up from the M8000................

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/

Author:	icarl [ Tue Jun 02, 2009 12:09 pm ]
Post subject:
dieselenthusiast wrote: dirt pig wrote: Does anyone know if a WARN XD9000 will fit in the ARB? The XD9000 fits, I think tjkj2002 might have one???????? Either way, it's a couple steps up from the M8000................ I believe tjkj has the 9.5xp model. The XD9000 will work though.

Author:	tjkj2002 [ Tue Jun 02, 2009 1:51 pm ]
Post subject:
icarl wrote: dieselenthusiast wrote: dirt pig wrote: Does anyone know if a WARN XD9000 will fit in the ARB? The XD9000 fits, I think tjkj2002 might have one???????? Either way, it's a couple steps up from the M8000................ I believe tjkj has the 9.5xp model. The XD9000 will work though. Yep I have the 9.5XP WARN,some serious muscle there.

Author:	dirt pig [ Wed Jun 03, 2009 2:11 am ]
Post subject:
Yeah, I got a quote for the 9500XP. It was AUS$500 more than the XD. I ended up ordering the XD. It's a little slower but Speed is not a priority for me. I don't plan on doing competition or anything like that !! Also ordered an Optima battery. I asked about the yellow top but ARB reccomended the blue-top with dual terminals on the top. Now the waiting begins!! (Like a child on Xmas nite !!)

Author:	Ryan09 [ Wed Jun 03, 2009 3:01 am ]
Post subject:
I am on my second "Champion Power Products" 9500 pound winch. The first one I had, I sold with my last 4X4 truck. Even though it is is made in China, it has never left me hanging! (No pun intended!) After many many years of trouble free usage, it was a very reliable winch. Pays out cable well and works just fine. I ended up buying another one just like it. (Only updated) For what I paid for it, I could not resist buying another one. It came with two wired hand held remotes, an extra "Anderson" type quick disconnect plug and master battery cables, and two 12000 lbs. stainless steel snatch blocks.

Author:	riptricket [ Wed Jun 03, 2009 8:42 am ]
Post subject:
Ryan09 wrote: I am on my second "Champion Power Products" 9500 pound winch. The first one I had, I sold with my last 4X4 truck. Even though it is is made in China, it has never left me hanging! (No pun intended!) After many many years of trouble free usage, it was a very reliable winch. Pays out cable well and works just fine. I ended up buying another one just like it. (Only updated) For what I paid for it, I could not resist buying another one. It came with two wired hand held remotes, an extra "Anderson" type quick disconnect plug and master battery cables, and two 12000 lbs. stainless steel snatch blocks. I have seen those at Sam's and I have wondered about them... just still need any money!