LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

best place to...
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=43798		 Page 1 of 2
Author:  Inc [ Tue Jun 02, 2009 9:32 pm ]
Post subject:  best place to...
find these???? Top Strut Spacer Plate


Image


Do any of these top plates come without the hole in the middle?

Rustys' wants $30 each. :shock: :?
Author:  tommudd [ Tue Jun 02, 2009 9:41 pm ]
Post subject: 
The RRO OTT lift has one piece that looks like that and the upper part is basically a flat plate the same size. with only a 1/2 inch hole in the top
Author:  JJsTJ [ Tue Jun 02, 2009 9:43 pm ]
Post subject: 
i know what you are up too. :wink:

only ones I have ever seen have the hole. Buy one, trace onto plate and cut and drill a pair. sell template to next guy building an sfa. :wink:
Author:  Inc [ Tue Jun 02, 2009 9:43 pm ]
Post subject: 
tommudd wrote:
The RRO OTT lift has one piece that looks like that and the upper part is basically a flat plate the same size. with only a 1/2 inch hole in the top


Does RRO sell just that piece?
Author:  jsc7002 [ Tue Jun 02, 2009 9:43 pm ]
Post subject: 
go and buy some 3/8" or 1/4" plate and make your own. 8)
Author:  Inc [ Tue Jun 02, 2009 9:46 pm ]
Post subject: 
jsc7002 wrote:
go and buy some 3/8" or 1/4" plate and make your own. 8)

Trying to avoid making my own.
Author:  Inc [ Tue Jun 02, 2009 9:47 pm ]
Post subject: 
JJsKJ wrote:
i know what you are up too. :wink:

only ones I have ever seen have the hole. Buy one, trace onto plate and cut and drill a pair. sell template to next guy building an sfa. :wink:


Seems to be a fairly easy way to go. :D
Author:  KJ kyle [ Tue Jun 02, 2009 9:47 pm ]
Post subject: 
upper coil over bracket?
Author:  Inc [ Tue Jun 02, 2009 9:49 pm ]
Post subject: 
KJ kyle wrote:
upper coil over bracket?

yeah
Author:  tommudd [ Tue Jun 02, 2009 9:57 pm ]
Post subject: 
heres some stuff I have in the garage :wink:
Image


Image
Image
Image

OTT spacer plus some extra spacers
Author:  Inc [ Tue Jun 02, 2009 9:59 pm ]
Post subject: 
Sell me 2 of those plates. :D
Author:  tommudd [ Tue Jun 02, 2009 10:03 pm ]
Post subject: 
Or would you want the OTT, cut and use what you want off of it? Hate to lose my door stop but for you....maybe :wink:
Author:  Inc [ Tue Jun 02, 2009 10:04 pm ]
Post subject: 
tommudd wrote:
Or would you want the OTT, cut and use what you want off of it? Hate to lose my door stop but for you....maybe :wink:

I think the plates would suit me fine. :wink:
Author:  tommudd [ Tue Jun 02, 2009 10:08 pm ]
Post subject: 
What are you offering?

PM and we'll deal

:twisted: No one else even ask because the other set is not for sale!

The OTT can be had though :wink:
Author:  Inc [ Tue Jun 02, 2009 10:12 pm ]
Post subject: 
PM incoming Tom.
Author:  03CDKJ [ Tue Jun 02, 2009 10:13 pm ]
Post subject: 
are those my springs???? 8)
Author:  tommudd [ Tue Jun 02, 2009 10:15 pm ]
Post subject: 
40 minutes to find what you wanted not too bad was it :lol: :lol: :lol: :lol:
Half of that time was me going out to the garage to take pictures :wink:
Author:  tommudd [ Tue Jun 02, 2009 10:16 pm ]
Post subject: 
03CDKJ wrote:
are those my springs???? 8)


Whoops no they are not , this is another set for......................... :shock:
Author:  JeepinJarhead03 [ Tue Jun 02, 2009 10:20 pm ]
Post subject: 
you can always trace them out on some heavy paper and mail the trace to me, you know i love playin with steel

all you'd have to do is tell me what steel, how thick and how pretty you want the grinding :P
Author:  Inc [ Tue Jun 02, 2009 10:22 pm ]
Post subject: 
tommudd wrote:
40 minutes to find what you wanted not too bad was it :lol: :lol: :lol: :lol:
Half of that time was me going out to the garage to take pictures :wink:



:D
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/