LOST JEEPS :: View topic - spare tire extender

still got 235-70-16's

the tire size isn't the particular issue problem is other clearance issues

http://www.rocky-road.com/kjtirespace.html

this was the actual one.. i don't know what the difference is

if there's no difference I guess i could use one from a TJ which are actually super common

i figure if it's not enough someone else can use it

if it's too much..
well.. it'll just get bolted onto a hanger and bolted to the rack

Something like that

the details don't really matter, simply need a extender

maybe i want to mount a hi-lift behind the spare across the gate?

but i can weld it to the cargo floor, just have to drop the tank and put in 2 pieces of angle iron trusses and a 1/2 inch plate ontop of the floorboard and itll be good enough for a mk19

Author:	JeepinJarhead03 [ Wed Jun 03, 2009 7:13 pm ]
Post subject:	spare tire extender
anyone know where I can get a spare tire extender similar to the one that RRO carries I had ordered one from RRO a week or two ago, called to check on it to see where it was cause it hadn't showed up yet and was told they didn't have anymore and that it would be a few weeks before they'ed have anymore

Author:	LibertyFever [ Wed Jun 03, 2009 8:24 pm ]
Post subject:
Is this what you were looking for? http://www.rocky-road.com/tirespace.html Just why do you need a spare tire extender? Is your spare hitting the bumper/window? I was able to flip my stock spare tire 180 degrees to clear the bumper & trailer hitch. Y'know you could always buy a 1.5" wheel spacer (about $50). Other people I know simply use a few washers.

Author:	JeepinJarhead03 [ Wed Jun 03, 2009 8:29 pm ]
Post subject:
that would be the one i ordered a few weeks ago, which i was just told today after i called to find out where the hell it was.. and was they wouldn't have anymore for 3 or 4 weeks.. so i had them cancel the order, now im lookin for one from elsewhere

Author:	tommudd [ Wed Jun 03, 2009 8:31 pm ]
Post subject:
I know what he is doing and it will need more than a few washers or flipping it, one spacer may work, but I think you are going to have to wait and see just how much its going to need before you buy something then be not enough or too much

Author:	JeepinJarhead03 [ Wed Jun 03, 2009 8:32 pm ]
Post subject:
http://www.rocky-road.com/kjtirespace.html this was the actual one.. i don't know what the difference is if there's no difference I guess i could use one from a TJ which are actually super common i figure if it's not enough someone else can use it if it's too much.. well.. it'll just get bolted onto a hanger and bolted to the rack

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

spare tire extender http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=43826	Page 1 of 1

Author:	tommudd [ Wed Jun 03, 2009 8:37 pm ]
Post subject:
I think you could weld one up would not take that much to do

Author:	oddball [ Wed Jun 03, 2009 8:46 pm ]
Post subject:
Jarhead, what size tires you runnin'? I have BFG AT ko LT255/70R/16 including my spare and the RRO extender is overkill. Not sure why the original owner bought it? Man I could park a bicycle between the tire & door.

Author:	oddball [ Wed Jun 03, 2009 9:30 pm ]
Post subject:
JeepinJarhead03 wrote: still got 235-70-16's the tire size isn't the particular issue problem is other clearance issues Huh? Clearance issues on the rear door with stock tires?

Author:	JeepinJarhead03 [ Wed Jun 03, 2009 9:39 pm ]
Post subject:
Something like that the details don't really matter, simply need a extender maybe i want to mount a hi-lift behind the spare across the gate?

Author:	oddball [ Wed Jun 03, 2009 9:49 pm ]
Post subject:
I considered that option as well. There is certainly enough space. But in the end, I decided I want to weld my RRO extender to the roof rack I plan to buy one of these days. Hi-Lift too.

Author:	LibertyFever [ Wed Jun 03, 2009 9:50 pm ]
Post subject:
JeepinJarhead03 wrote: http://www.rocky-road.com/kjtirespace.html this was the actual one.. i don't know what the difference is if there's no difference I guess i could use one from a TJ which are actually super common i figure if it's not enough someone else can use it if it's too much.. well.. it'll just get bolted onto a hanger and bolted to the rack I've got one of those in my garage somewhere. I bought it for my YJ but managed to snap the studs off of it

Author:	Cobalt-60 [ Wed Jun 03, 2009 10:16 pm ]
Post subject:
JeepinJarhead03 wrote: Something like that the details don't really matter, simply need a extender maybe i want to mount a hi-lift behind the spare across the gate? No, no, no, JJH.... you can't put a pintel-mount M240 on the rear door for your tail-gunner!!!

Author:	JeepinJarhead03 [ Wed Jun 03, 2009 10:22 pm ]
Post subject:
but i can weld it to the cargo floor, just have to drop the tank and put in 2 pieces of angle iron trusses and a 1/2 inch plate ontop of the floorboard and itll be good enough for a mk19

Author:	Cobalt-60 [ Wed Jun 03, 2009 10:32 pm ]
Post subject:
JeepinJarhead03 wrote: but i can weld it to the cargo floor, just have to drop the tank and put in 2 pieces of angle iron trusses and a 1/2 inch plate ontop of the floorboard and itll be good enough for a mk19 40 Mike-Mike??? Very nice...

Author:	JeepinJarhead03 [ Wed Jun 03, 2009 8:39 pm ]
Post subject:
i hate welding drilling = yes grinding = yes welding = Boooo

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/

Author:	daspes [ Wed Jun 03, 2009 10:46 pm ]
Post subject:
JeepinJarhead03 wrote: http://www.rocky-road.com/kjtirespace.html this was the actual one.. i don't know what the difference is if there's no difference I guess i could use one from a TJ which are actually super common i figure if it's not enough someone else can use it if it's too much.. well.. it'll just get bolted onto a hanger and bolted to the rack TJ one will work. http://www.4wd.com/productdetails.aspx? ... rtID=12004