LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

HELP!!
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=43980		 Page 1 of 2
Author:  scout [ Mon Jun 08, 2009 9:32 pm ]
Post subject:  HELP!!
I need a ARB front bumper now!! I need to know where I can get one ship to my house in this week. I just got stuck and ripped my stock bumper off... on and then I ran it over. I leave texas in 12 days!! Im looking right now but those of you that have them where did you get yours and how long did it take?
Author:  Jeep Dawg [ Mon Jun 08, 2009 9:37 pm ]
Post subject: 
call heather over at boulderbars.com
they are heavy and shipping is GROUND!
Author:  tjkj2002 [ Mon Jun 08, 2009 10:32 pm ]
Post subject: 
Jeep Dawg wrote:
call heather over at boulderbars.com
they are heavy and shipping is GROUND!
Not to mention it has to be shipped by freight also.If there's a 4 Wheel Parts near by they may be able to get one in fast without the shipping charges.You can order one on there website and have it shipped to the nearest store for free.
Author:  JeepinJarhead03 [ Mon Jun 08, 2009 10:35 pm ]
Post subject: 
Isn't there an ARB dealer in Dallas or San Antonio ?
Author:  scout [ Mon Jun 08, 2009 10:50 pm ]
Post subject: 
I just called 4 wheel parts and it will take a month to get here because they have to have it shipped from Astralia. I will call boulder bars tomorrow... any other ideas?
Author:  Guest [ Mon Jun 08, 2009 10:56 pm ]
Post subject: 
ThunderbirdJunkie reminds Scout that there was a screaming deal on TJM bars from Rusty's...
Author:  tumanator [ Mon Jun 08, 2009 11:02 pm ]
Post subject: 
Dunno these people, or where they are, but they sell them and personally I like the looks of their price.
http://www.4x4groupbuy.com/store/front-bull-jeep-liberty-20052006-p-5132.html

*BTW, pull your bumper off and run over it, good excuse...almost wish i'd have though of that, lemme know how it works :lol: :-)r
Author:  Drassis [ Tue Jun 09, 2009 12:04 am ]
Post subject: 
ThunderbirdJunkie wrote:
ThunderbirdJunkie reminds Scout that there was a screaming deal on TJM bars from Rusty's...



They had bro I bought one of the last ones their all gone now
Author:  Ms5490renegade [ Tue Jun 09, 2009 12:38 am ]
Post subject: 
why the rush? cant you also just get a new stock bumper from a jnk yard or the dealer
Author:  JeepinJarhead03 [ Tue Jun 09, 2009 1:27 am ]
Post subject:  Re: HELP!!
scout wrote:
I just got stuck and ripped my stock bumper off... on and then I ran it over. I leave texas in 12 days!!?


that would probably explain the rush


a primered front bumper cover is about 250-300 bucks

which is a decent chunk of the price of an ARB
Author:  Boiler [ Tue Jun 09, 2009 1:32 am ]
Post subject: 
tumanator wrote:
*BTW, pull your bumper off and run over it, good excuse...almost wish i'd have though of that, lemme know how it works :lol: :-)r


Don't destroy parts to you can get upgrades...SELL your old parts to help pay for them instead!
Author:  teckman02 [ Tue Jun 09, 2009 2:27 am ]
Post subject: 
how bad does the bumper look show us pics mayb a little duct tape will fix it can't be as bad as mine
Author:  JeepinJarhead03 [ Tue Jun 09, 2009 2:32 am ]
Post subject: 
that mud looked similar to NTC oki mud he might have sent the bumper to the bottom :lol:

i know i left half my gear in NTC due to the mud and if you reach down far enough you might come back up with a 30 year old pair of boots :lol:
Author:  tomsjeep [ Tue Jun 09, 2009 9:10 am ]
Post subject: 
Go up to north Ft. Hood, park it in one of the dry washes, wait for a rainstorm and then call your insurance company so you can get a new Liberty.

Serioulsy:
There are lots of folks that deal with ARB. You're just going to have to call around until you find someone that has one in stock. List of suppliers is pretty long here on this forum alone. And there are folks that have stuff that aren't on the list (Jeepers and Creepers comes to mind). Good luck. Hope you're not headed to Ft. Polk. Pinewood, LA makes Killeen, TX look like paradise!
Author:  jeepkj02 [ Tue Jun 09, 2009 10:55 am ]
Post subject: 
...or if you are in the Washington state area, that is where ARB headquarters is located. You can buy the bumper directly from them and save in freight costs.
Author:  Sir Sam [ Tue Jun 09, 2009 12:53 pm ]
Post subject:  Re: HELP!!
JeepinJarhead03 wrote:
scout wrote:
I just got stuck and ripped my stock bumper off... on and then I ran it over. I leave texas in 12 days!!?


that would probably explain the rush


a primered front bumper cover is about 250-300 bucks

which is a decent chunk of the price of an ARB


Textured was about $95 last I checked.

Paint to match was about $120 last I checked.
Author:  JeepinJarhead03 [ Tue Jun 09, 2009 3:20 pm ]
Post subject: 
i checked 3 places last night before posting that they were all in the range i listed, of course they were actually New not used

we need a used parts list sticky somewhere
Author:  icarl [ Tue Jun 09, 2009 3:58 pm ]
Post subject: 
Boiler wrote:
tumanator wrote:
*BTW, pull your bumper off and run over it, good excuse...almost wish i'd have though of that, lemme know how it works :lol: :-)r


Don't destroy parts to you can get upgrades...SELL your old parts to help pay for them instead!


I threw out all my old parts including the bumper. No where to store it and who wants 6 year old springs anyways.
Author:  icarl [ Tue Jun 09, 2009 4:04 pm ]
Post subject: 
scout wrote:
I just called 4 wheel parts and it will take a month to get here because they have to have it shipped from Astralia. I will call boulder bars tomorrow... any other ideas?


Weird, i thought they shipped them from ARB USA. No more left?
Author:  dirt pig [ Wed Jun 10, 2009 1:56 am ]
Post subject: 
I ordered the last one in stock in Australia, 2 weeks ago. So if they are only manufactured in Australia, that Month wait could be a lot longer !!. I booked in for color coding and there was a 2 week wait for that ! (Global Economic Crisis means lay-off's. Only one painter)
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/