does anyone know where to get the "nutsertz" or has anyone used anything instead to mount the bar to your roof? I bought a used bar and it didnt come with all that.

This is what the 2005 Parts List doc says:
Part # | Name | Info
6503 952 | SCREW | Pan Head, M6x1.0x17.00
6100 876 | WASHER | Flat, M6.82x17.00x1.75
6504 710 | NUT/RIVET | M6x1.00x13.50

I can try to get a screenshot of the page if you want but it might be easier (and more helpful to you) if you can track down the parts list pdf file.

_________________
2006 Limited 3.7L
OME Everything
245/75R16 Toyo ATs on Ultra type 51s
Mopar skids, Flowmaster 50 delta

You have to order from the dealer.

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.

we have a nutzert tool that came with a many different sizes of nutzerts.. the tool makes installing them SOOOOO much easier than cranking them with a ratchet.. the tool is a large squeezing boltcutter looking thing that acts like a big river gun.

this is what ours is.. http://www.findtheneedle.co.uk/images/p ... /78141.jpg

_________________
2006 Renegade. Completely stock.

Here's my howto, maybe you've seen it before.

http://www.jeepkj.com/forum/showthread.php?t=34988

And here is my nutzert tool.

_________________
Cherokee 2,5 CRD: sold - Wrangler TJ 2.5: gone - Touareg V10 TDI: new toy

Solo Liberty en Español: Jeepliberty.es

as far as the tool im not sure, but you can use a peice of all-thread and same size nut. the nutserts are avalible at lowes in the specialty hardware section.

_________________
If it aint broke, Break it!!!!!

06 sport
mickeythompson MTZ 265/75/16
2.5 skyjacker
rola roof basket
kc slimlites
stock wheels black powder coated

This may still be of interest to you - I picked one of these up "39214 Marson Steel Klik Thread-Sert Kit (39214)" for like 60 bucks from:

http://www.blindrivetsupply.com/ and it is amazing how handy it is...

Then went back and picked up the metric conversion kit for it so now I can do metric inserts as well.

You can also see some products at:

http://www.nutty.com/threatsert.shtml

_________________
See Ya!
JMM
06 KJ Sport - ARB Front, RL Rear, RL Rock Rails, Soft8s, MOPAR Skids & Hitch,
Thule Roof Rack, FrankenLift II Premium, Al's Uppers, Winch, CB, Totally UGLY roof basket, 245 MT/Rs, Hella 500s

I tacked welded mine into place for added tightness.

_________________
2003 KJ Sport JEEPZILLA Edition
American Flag flying high
Frankenlift removed =(
Moabs and plenty of pin striping
Flexable people don't get bent out of shape!
Current MPG 6" to a gallon
L.O.S.T. # BL065211
www.ItAtYourHome.com