How do I get the tranny pan off? it wont budge with the OEM RTV on there.. its seeping fluids but i cant the pan to budge at the corner to drain the fluid? anybody have any tricks?

_________________
2016 JKU RUBICON

other mods coming soon...

When I did mine, loosened all bolts then started removing and used a screw driver to assist i the seperating of the pan.

Loosen all bolts then remove from back to front, halfway through use the screwdriver to pry one corner.

_________________
Will
05 Limited 4x4 Franky II Al's A-arms Black Moabs with MTR's Remote Start SOLD
06 TJ Rubicon Built
06 Dodge 2500 Diesel - Tow Pig
89 Wrangler not much left stock on it

When I removed mine, I loosened the bolts and tapped it with a rubber mallet. Presto! just watch out for some falling fluid. I didn't use the screw driver in fear to mar it too badly.

_________________
My Rig:
2008 Jeep Wrangler JKU
OME HD lift
35" tires (thus far)
plus a ton of other things. J.E.E.P.

ok it worked thanks every one

_________________
2016 JKU RUBICON

other mods coming soon...