When I removed mine, I loosened the bolts and tapped it with a rubber mallet. Presto! just watch out for some falling fluid.
I didn't use the screw driver in fear to mar it too badly.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| ok now how do I get the http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=44846 |
Page 1 of 1 |
| Author: | 0311_DoC [ Wed Jul 08, 2009 3:03 pm ] |
| Post subject: | ok now how do I get the |
How do I get the tranny pan off? it wont budge with the OEM RTV on there.. its seeping fluids but i cant the pan to budge at the corner to drain the fluid? anybody have any tricks? |
|
| Author: | KJ Willy [ Wed Jul 08, 2009 3:07 pm ] |
| Post subject: | |
When I did mine, loosened all bolts then started removing and used a screw driver to assist i the seperating of the pan. Loosen all bolts then remove from back to front, halfway through use the screwdriver to pry one corner. |
|
| Author: | Xodius [ Wed Jul 08, 2009 3:14 pm ] |
| Post subject: | |
When I removed mine, I loosened the bolts and tapped it with a rubber mallet. Presto! just watch out for some falling fluid. I didn't use the screw driver in fear to mar it too badly.
|
|
| Author: | 0311_DoC [ Wed Jul 08, 2009 3:28 pm ] |
| Post subject: | |
ok it worked thanks every one
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|