ThunderbirdJunkie wrote:
"custom Realtree pinstriping"
tbj is that "custom Realtree pinstriping" or "real tree scraping"
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| GGGRRRR someone up there hates me.... http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=44855 |
Page 1 of 1 |
| Author: | 0311_DoC [ Wed Jul 08, 2009 4:54 pm ] |
| Post subject: | GGGRRRR someone up there hates me.... |
So i am tightening the bolts back up on the tranny pan and the service manual says 105 torque the bolt snapped at like maybe 70 ? now what the heck do i do???? |
|
| Author: | Jeepjeepster [ Wed Jul 08, 2009 6:23 pm ] |
| Post subject: | |
Sure thats not 105 INCH lbs???? Read about that all the time. Did it break flush? If youre not comfortable drilling/tapping the bolt out take it to a shop and have them do it. |
|
| Author: | 2006 KJ [ Wed Jul 08, 2009 6:25 pm ] |
| Post subject: | |
if you can take the pan off and get on the bolt with some vice grips that could work as well. |
|
| Author: | jeepskate [ Wed Jul 08, 2009 6:54 pm ] |
| Post subject: | |
Yikes, yeah, that's 105 inch-pounds. (8.75 foot-pounds). Ouch! Something like this should get it out: http://www.amazon.com/gp/product/B00062ZDF4 |
|
| Author: | JL Rockies [ Wed Jul 08, 2009 8:11 pm ] |
| Post subject: | |
Do you suffer from a persecution complex? |
|
| Author: | 0311_DoC [ Wed Jul 08, 2009 8:45 pm ] |
| Post subject: | |
JL Rockies wrote: Do you suffer from a persecution complex?
probably... |
|
| Author: | 0311_DoC [ Wed Jul 08, 2009 8:47 pm ] |
| Post subject: | |
Jeepjeepster wrote: Sure thats not 105 INCH lbs???? Read about that all the time.
Did it break flush? If youre not comfortable drilling/tapping the bolt out take it to a shop and have them do it. yea it broke flush all I have left is the head of the bolt... |
|
| Author: | 0311_DoC [ Wed Jul 08, 2009 8:48 pm ] |
| Post subject: | |
jeepskate wrote: Yikes, yeah, that's 105 inch-pounds. (8.75 foot-pounds). Ouch! Something like this should get it out:
http://www.amazon.com/gp/product/B00062ZDF4 yea it wasnt even that much before it busted ... |
|
| Author: | Boiler [ Wed Jul 08, 2009 10:15 pm ] |
| Post subject: | |
google EZ Out or easy out...not sure which. Basically you drill a hole in the fastener end, and then this thing screws into that hole, but it is a cross threaded screw. Keep screwing in, and the bolt turns the right way to come out. |
|
| Author: | tjkj2002 [ Wed Jul 08, 2009 10:41 pm ] |
| Post subject: | |
0311_DoC wrote: jeepskate wrote: Yikes, yeah, that's 105 inch-pounds. (8.75 foot-pounds). Ouch! Something like this should get it out: http://www.amazon.com/gp/product/B00062ZDF4 yea it wasnt even that much before it busted ... |
|
| Author: | Guest [ Thu Jul 09, 2009 12:54 am ] |
| Post subject: | |
If you manage to get it out...make sure you get a new pan...because if you actually torqued that bolt to 105 ft lb, that pan is fubar. |
|
| Author: | icarl [ Thu Jul 09, 2009 2:32 am ] |
| Post subject: | |
ThunderbirdJunkie wrote: "custom Realtree pinstriping"
tbj is that "custom Realtree pinstriping" or "real tree scraping"
|
|
| Author: | Guest [ Thu Jul 09, 2009 2:33 am ] |
| Post subject: | |
Aren't they the same?
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|