| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| broken vent fix? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=45211 |
Page 1 of 1 |
| Author: | blake1827 [ Wed Jul 22, 2009 12:38 am ] |
| Post subject: | broken vent fix? |
So during my vacation one of the center dash vents broke. I've swapped out the stereo before, is it much more involved to remove the dash trim above the radio and fix or replace? Thanks |
|
| Author: | Budke [ Wed Jul 22, 2009 1:26 am ] |
| Post subject: | |
Like just the vent things themselves that you move around and whatnot? Cause if its those they just pop right out, I need to replace my two center ones. the left one is a PITA to move and the right one just straight broke, it doesen't even have the adjustment vents in it. |
|
| Author: | blake1827 [ Wed Jul 22, 2009 11:20 am ] |
| Post subject: | |
yeah, just the center vertical vent moves, the others seem to have detached somehow but they aren't loose or broken off. |
|
| Author: | Budke [ Wed Jul 22, 2009 11:54 am ] |
| Post subject: | |
Yeah, thats exactly what mine did. I've looked around and found some cheap ones on ebay, some websites that have libby parts usually carry those too. Check juck yards too. All you gotta do to replace it is just pop it out and swap out the vent things and put it back in and it should snap right into place. |
|
| Author: | jnaut [ Wed Jul 22, 2009 6:51 pm ] |
| Post subject: | |
Budke wrote: Yeah, thats exactly what mine did.
I've looked around and found some cheap ones on ebay, some websites that have libby parts usually carry those too. Check juck yards too. All you gotta do to replace it is just pop it out and swap out the vent things and put it back in and it should snap right into place. X2 You don't have to remove anything to replace those circular vents. You can take them out by applying a little pressure on the sides and they'll lift right out. Opposite to put them back. They have asymmetrical notches, on one side it's just a sort of hole, the other is a slotted hole. When putting it back the idea is you put one side in first, then push and snap the other side into place. |
|
| Author: | Budke [ Wed Jul 22, 2009 9:14 pm ] |
| Post subject: | |
Yep. I'm going to the junkyard sometime this month to hopefully find some to replace my two center ones. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|