| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Quick install of Front O2 sensor on the KJ driver's side http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=45331 |
Page 1 of 1 |
| Author: | mikingquad2007 [ Sun Jul 26, 2009 2:22 pm ] |
| Post subject: | Quick install of Front O2 sensor on the KJ driver's side |
I'm trying to help my hubby out since he's afraid of computers. I would like to know the easiest way to install the O2 sensor on the driver's side front of the engine. Thanks guys. |
|
| Author: | Dje Ryu [ Sun Jul 26, 2009 2:57 pm ] |
| Post subject: | |
It's pretty straightforward. Located almost directly under the driver's seat. Screws into top of exhaust, not too hard to spot once you crawl under there. Just unplug, unscrew, replace and plug in new. |
|
| Author: | Dje Ryu [ Sun Jul 26, 2009 3:04 pm ] |
| Post subject: | |
Oh yeah. I believe you're supposed to disconnect the battery first, as well. |
|
| Author: | kj-dec [ Sun Jul 26, 2009 10:58 pm ] |
| Post subject: | |
There's usually instruction in the package about whether or not to do it with the exhaust system cold/warm/hot. Its been so long since I did it (on the Jeep's predecessor) that I don't remember which but you could have a lot of problems if you try to remove the old one without following the directions. |
|
| Author: | mikingquad2007 [ Sun Aug 02, 2009 4:39 pm ] |
| Post subject: | |
I need to know how to get to the front 02 sensor. Anybody? We took the driver's side wheel off and can't get to from there. It's the one before the cadillac conveter. |
|
| Author: | dirt pig [ Mon Aug 03, 2009 6:51 am ] |
| Post subject: | |
Here thy are:
|
|
| Author: | dirt pig [ Mon Aug 03, 2009 6:52 am ] |
| Post subject: | |
Easiest way is on your back under the vehicle, (Not the wheel well) |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|