LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Indiana or Ohio Hitch Owners?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=45933		 Page 1 of 1
Author:  Boiler [ Tue Aug 18, 2009 12:38 am ]
Post subject:  Indiana or Ohio Hitch Owners?
Sorry this isn't in the regional forum, but I figured this was my best shot at finding help.

I'm looking to measure a handful of different types of hitches. If there is anyone in Indiana or western ohio that could let me crawl under their Jeep and measure their hitch for 15 minutes, I'd appreciate it. I was supposed to do it this weekend and had 2 many distractions.

Or even someone more remote that was geometrically inclined to fill in the blanks on a sketch for me. You'd probably need a protractor of some sort, a tape measure, machinists squares would probably help. I basically need to reverse engineer the hitches, documenting the geometry of their mount plates/angles, crossbar (with bends), etc.

Please send PM's if you can lend me a hand in one way or the other.
Author:  TAHOE [ Tue Aug 18, 2009 8:31 am ]
Post subject: 
mine is homemade from a GM hitch.. not sure if that would work for ya :?
Author:  Boiler [ Tue Aug 18, 2009 8:41 am ]
Post subject: 
Was hoping to check out a mopar, hidden hitch, reese, uhaul, anything like that. (or all of them). I've been calling around and nobody stocks anything....or wants to order one just so I can look at it for 20 minutes :wink:
Author:  ChiroKJ [ Tue Aug 18, 2009 10:40 am ]
Post subject: 
i have a uhaul and its been ok so far. they havea $5 lifetime warranty its really good actually. and for another $10 u can get the wiring insured in case an animal eats it. they cover pretty much anything.
Author:  Rich [ Tue Aug 18, 2009 11:18 am ]
Post subject: 
Boiler wrote:
Was hoping to check out a mopar, hidden hitch, reese, uhaul, anything like that. (or all of them). I've been calling around and nobody stocks anything....or wants to order one just so I can look at it for 20 minutes :wink:


I will be picking up a brand new mopar this week from the dealer. PM me a list of the measurements before and after installation and I will do my best to get you what you need.
Author:  Boiler [ Tue Aug 18, 2009 2:42 pm ]
Post subject: 
Well, I found a dealer that had one...ordered it to put on someones jeep tomorrow morning. I had to drive an hour to measure it for 20 minutes. I called about a dozen places around here, and found that one via a dealers network.

I now have the dimensions of the mopar, but I'd still like to check some of the others.
Author:  STINGN [ Tue Aug 18, 2009 7:45 pm ]
Post subject: 
Boiler wrote:
Well, I found a dealer that had one...ordered it to put on someones jeep tomorrow morning. I had to drive an hour to measure it for 20 minutes. I called about a dozen places around here, and found that one via a dealers network.

I now have the dimensions of the mopar, but I'd still like to check some of the others.


when you come to the meet and greet at my place on the 29th, you can measure my reese hitch, reason why I cant now, i currently dont have the jeep, its sitting in my garage while im at my buddies for a few days
Author:  Boiler [ Tue Aug 18, 2009 10:31 pm ]
Post subject: 
thats fine, will be a good doublecheck. I'm not going to measure every hitch out there, I'd be measuring for a month...
Author:  STINGN [ Tue Aug 18, 2009 11:08 pm ]
Post subject: 
Boiler wrote:
thats fine, will be a good doublecheck. I'm not going to measure every hitch out there, I'd be measuring for a month...


well, i know i have the reese, jayme has the mopar, and i dont know about oddball, but i think he has the uhaul...heck, when im done with my lift, i can help measure if you need me too :)
Author:  Boiler [ Tue Aug 18, 2009 11:31 pm ]
Post subject: 
Actually, since I measured the mopar today, I have a rough model nearly ready for making drawings. I'm going to try to have my prototype aluminum skid ready by that day. I would love to spend my day installing and uninstalling it with your different configurations. Another thing I need to check out is model year differences / tank sizes.
Author:  STINGN [ Tue Aug 18, 2009 11:37 pm ]
Post subject: 
Boiler wrote:
Actually, since I measured the mopar today, I have a rough model nearly ready for making drawings. I'm going to try to have my prototype aluminum skid ready by that day. I would love to spend my day installing and uninstalling it with your different configurations. Another thing I need to check out is model year differences / tank sizes.


a lot of us at the IL lift part will have 02-04's, and I think I am the only 1 with/out a skid on the gas tank
Author:  Boiler [ Wed Aug 19, 2009 1:20 am ]
Post subject: 
Perfect, I have an 05 and want to check it vs the smaller tanks. I can drop skids and put them back together. We'll see what models / hitches are there and play it by ear.
Author:  STINGN [ Wed Aug 19, 2009 2:02 am ]
Post subject: 
Boiler wrote:
Perfect, I have an 05 and want to check it vs the smaller tanks. I can drop skids and put them back together. We'll see what models / hitches are there and play it by ear.


sounds good to me!
Author:  kjfishman [ Thu Aug 20, 2009 3:19 pm ]
Post subject: 
The factory hitch isn't priced too bad. Some places even discount them. Check JPARTS http://jparts.com/product_info.php?cPat ... b425608965 $166
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/