| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| question http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=45981 |
Page 1 of 1 |
| Author: | JeepBumm68 [ Wed Aug 19, 2009 11:15 pm ] |
| Post subject: | question |
Hey the 42rle transmission that the crd libertys use. What spline count is the output shaft? And what spline is the TC's input shafT? |
|
| Author: | tjkj2002 [ Wed Aug 19, 2009 11:24 pm ] |
| Post subject: | |
The CRD uses the 545RFE auto trans(same basic setup as the 45RFE trans) and not the 42RLE.The output shaft is 23-spline,meaning the t-case has a 23-spline input.You can have 1 of 3 different length output shafts also on that trans. |
|
| Author: | JeepBumm68 [ Thu Aug 20, 2009 10:48 am ] |
| Post subject: | |
Oh ok thanks Troy. ya i needed to know the output shaft spline count for the new tc we might be putting in it. 1 of 3 different lengths?> |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|