| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| A Little Much?? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=46004 |
Page 1 of 2 |
| Author: | lil black liberty [ Thu Aug 20, 2009 9:50 pm ] |
| Post subject: | A Little Much?? |
http://jeepinbyal.com/prod-JBA_Big_12in_KJ-640.aspx |
|
| Author: | Robbrez [ Thu Aug 20, 2009 10:19 pm ] |
| Post subject: | |
maybe it would look better with 35's?...i wouldnt trust that lift |
|
| Author: | jsc7002 [ Thu Aug 20, 2009 10:41 pm ] |
| Post subject: | |
Robbrez wrote: maybe it would look better with 35's?...i wouldnt trust that lift
I trust it because I trust JBA but it still has the D30a, so you still are stuck with the 32" tires plus you gotta pay to play |
|
| Author: | Murphyman [ Thu Aug 20, 2009 10:49 pm ] |
| Post subject: | |
There isn't a price yet, but might as well do a SFA swap for that. |
|
| Author: | Robbrez [ Thu Aug 20, 2009 10:59 pm ] |
| Post subject: | |
Murphyman wrote: There isn't a price yet, but might as well do a SFA swap for that.
price is on the right hand side next to the picture Price: $4,900.00 |
|
| Author: | Murphyman [ Thu Aug 20, 2009 11:02 pm ] |
| Post subject: | |
Robbrez wrote: Murphyman wrote: There isn't a price yet, but might as well do a SFA swap for that. price is on the right hand side next to the picture Price: $4,900.00 I need to keep my mouth shut. |
|
| Author: | Robbrez [ Thu Aug 20, 2009 11:06 pm ] |
| Post subject: | |
Murphyman wrote: Robbrez wrote: Murphyman wrote: There isn't a price yet, but might as well do a SFA swap for that. price is on the right hand side next to the picture Price: $4,900.00 I need to keep my mouth shut. haha i saw you were getting ready to go to college...where are you going? |
|
| Author: | Murphyman [ Thu Aug 20, 2009 11:09 pm ] |
| Post subject: | |
Appalachain State University. It's in the North Carolina mountains. I made a post about it in the Off Topic section. Hoping to get some good, and most likely clever and dumb, advice before I head out |
|
| Author: | Robbrez [ Thu Aug 20, 2009 11:24 pm ] |
| Post subject: | |
Murphyman wrote: Appalachain State University. It's in the North Carolina mountains. I made a post about it in the Off Topic section. Hoping to get some good, and most likely clever and dumb, advice before I head out
one more year till i go to college |
|
| Author: | riptricket [ Fri Aug 21, 2009 12:07 am ] |
| Post subject: | |
I just finished!!! And BTW I think that 12 inch lift looks ridiculous! I would not want to go any higher than 3 or 4 inches! |
|
| Author: | lil black liberty [ Fri Aug 21, 2009 12:45 am ] |
| Post subject: | |
Well even the 6" lift is a bit much I think.. but then again I'll never forget this one even though its a YJ http://workshop.supertrux.com/whatsin.asp |
|
| Author: | DryBones [ Fri Aug 21, 2009 7:21 am ] |
| Post subject: | Re: A Little Much?? |
lil black liberty wrote: http://jeepinbyal.com/prod-JBA_Big_12in_KJ-640.aspx
jus plain awful. still doesn't get you any more ground clearance, and that passenger side front tire looks to be bowing out, needs an alignment or maybe just be sent to the crusher. |
|
| Author: | Jeep Dawg [ Fri Aug 21, 2009 8:53 am ] |
| Post subject: | |
DAMM. I had problems with my 3" Frankenlift. What would happen if I went with 12" lift? ENGIN MIGHT BE TOO SMALL FOR THIS LIFT! (DIFFs will have alot of stress rolling this guy) |
|
| Author: | tonycrd [ Fri Aug 21, 2009 4:37 pm ] |
| Post subject: | |
Jeep Dawg wrote: DAMM.
ENGIN MIGHT BE TOO SMALL FOR THIS LIFT! (DIFFs will have alot of stress rolling this guy) It is a 2.8 CRD. Plenty of torque to get this thing rolling. And IMO there is no more stress on the differencials then when it was stock. Untill they put on 35" tires...then a proper re-gear would come in handy. And a stronger (KK?) front axle. JBA and RLF are my heroes, there are no other companies that are so involved in making great stuff for the Libby.... Where would we be without JBA's UCA's? Just one little thing...how does one get in and out of that KJ....I already sortof jump out of mine with only 3" of lift... AHA!
|
|
| Author: | Rich [ Fri Aug 21, 2009 5:41 pm ] |
| Post subject: | |
That Libby makes baby Jeebus cry. |
|
| Author: | jhblackwell [ Fri Aug 21, 2009 6:44 pm ] |
| Post subject: | |
FAR-OUT! Any Shriners come with that? (Sorry, I couldn't help myself.) |
|
| Author: | ObiHann [ Fri Aug 21, 2009 8:48 pm ] |
| Post subject: | |
Robbrez wrote: Murphyman wrote: Appalachain State University. It's in the North Carolina mountains. I made a post about it in the Off Topic section. Hoping to get some good, and most likely clever and dumb, advice before I head out one more year till i go to college Ive been out for almost 3 years |
|
| Author: | ObiHann [ Fri Aug 21, 2009 8:49 pm ] |
| Post subject: | |
Seriously though, they should of did a alignment before they took the pic, those front tires are caving in! |
|
| Author: | Inc [ Fri Aug 21, 2009 9:00 pm ] |
| Post subject: | |
I'd like to see how he mounted the rear arms on the unibody. I'd also like more info on the type of materials he uses in this kit. It is easy to get a vehicle that high, but keeping it together so it doesn't rip apart is the hard part. I sent him an email requesting more info on it. I'm not sure what kind of real performance gain this lift would have over his 4" or 6" kit. |
|
| Author: | mrpink417 [ Fri Aug 21, 2009 9:35 pm ] |
| Post subject: | |
good thing they left the mud flaps on it. p!nK |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|