| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Rear tow point http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=46231 |
Page 1 of 1 |
| Author: | jeepmedic46 [ Sun Aug 30, 2009 4:45 pm ] |
| Post subject: | Rear tow point |
I finally got a rear tow point for my 04. I was wondering what size bolt to use? Do I need a taper on the tip to help clean out the threads? |
|
| Author: | tjkj2002 [ Sun Aug 30, 2009 9:13 pm ] |
| Post subject: | |
M12x1.75x40mm,grade 10.9 or 12.9 only. |
|
| Author: | Rich [ Mon Aug 31, 2009 9:19 am ] |
| Post subject: | |
+1 Also make sure you run a M12x1.75 tap through the factory bolt holes to clean out all the gunk. I also put a bit of anti-seize on the threads to prevent the corrosion factor. |
|
| Author: | jeepmedic46 [ Mon Aug 31, 2009 10:28 am ] |
| Post subject: | |
Thank you, The bolts that I got seem to big. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|