Rear tow point

jeepmedic46 · **Posted:** Sun Aug 30, 2009 4:45 pm

I finally got a rear tow point for my 04. I was wondering what size bolt to use? Do I need a taper on the tip to help clean out the threads?

tjkj2002 · **Posted:** Sun Aug 30, 2009 9:13 pm

M12x1.75x40mm,grade 10.9 or 12.9 only.

Rich · **Posted:** Mon Aug 31, 2009 9:19 am

+1

Also make sure you run a M12x1.75 tap through the factory bolt holes to clean out all the gunk. I also put a bit of anti-seize on the threads to prevent the corrosion factor.

jeepmedic46 · **Posted:** Mon Aug 31, 2009 10:28 am

Thank you, The bolts that I got seem to big.

Rear tow point

Who is online