| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Hazard Light Switch Question http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=47245 |
Page 1 of 1 |
| Author: | mrneen [ Sat Oct 17, 2009 4:32 pm ] |
| Post subject: | Hazard Light Switch Question |
Just a quick question... my hazard light switch i think is about to die.... it does not turn off unless i push it down really hard.. i mean i have to put alot of force on the button in order for the button to 'click' in. my question is has anyone else had this problem? and how hard are they to replace? thanks |
|
| Author: | BugginKJ [ Sat Oct 17, 2009 11:39 pm ] |
| Post subject: | |
Yep my neighbor did, same exact problem. I popped it out and with compressed air blew out all the crud that made its way in there. Now it works like new. Or yours could just be going out the door........... |
|
| Author: | m_volyrakis [ Sun Oct 18, 2009 9:13 am ] |
| Post subject: | |
Try blowing it with air first if that does n't work here is one on e-bay for 20 $ http://cgi.ebay.com/ebaymotors/2002-07- ... ccessories or hit the local junkyard. In any case get yourself a spare before this one dies out on you. |
|
| Author: | mrneen [ Sun Oct 18, 2009 4:42 pm ] |
| Post subject: | |
thanks for the reply guys... ill do the air thing first. hopefully that will work. when i do take it out.. i assume i haver to take apart the dash? or is there another way? |
|
| Author: | BugginKJ [ Sun Oct 18, 2009 6:32 pm ] |
| Post subject: | |
mrneen wrote: thanks for the reply guys... ill do the air thing first. hopefully that will work.
when i do take it out.. i assume i haver to take apart the dash? or is there another way? Have to take the dash apart. |
|
| Author: | mrneen [ Sun Oct 18, 2009 7:35 pm ] |
| Post subject: | |
BugginKJ wrote: mrneen wrote: thanks for the reply guys... ill do the air thing first. hopefully that will work. when i do take it out.. i assume i haver to take apart the dash? or is there another way? Have to take the dash apart. is that easy or hard to do? anyone have any suggestions to make my life easy when i take the dash apart. lol |
|
| Author: | BugginKJ [ Sun Oct 18, 2009 7:36 pm ] |
| Post subject: | |
mrneen wrote: BugginKJ wrote: mrneen wrote: thanks for the reply guys... ill do the air thing first. hopefully that will work. when i do take it out.. i assume i haver to take apart the dash? or is there another way? Have to take the dash apart. is that easy or hard to do? anyone have any suggestions to make my life easy when i take the dash apart. lol Just clips and be careful/gentle when pryin off/out. Very simple really. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|