I need the measurement jut like in the bottom illustration of this pic:
Thank you.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 8.25 Axle Shafts http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=47301 |
Page 1 of 1 |
| Author: | Inc [ Mon Oct 19, 2009 11:45 pm ] |
| Post subject: | 8.25 Axle Shafts |
Does anyone have the measurements of the stock 8.25 axle shafts? I need the length. |
|
| Author: | tommudd [ Mon Oct 19, 2009 11:59 pm ] |
| Post subject: | |
from the end of the stub to where? |
|
| Author: | Inc [ Tue Oct 20, 2009 12:04 am ] |
| Post subject: | |
I need the measurement jut like in the bottom illustration of this pic:
Thank you. |
|
| Author: | tommudd [ Tue Oct 20, 2009 12:10 am ] |
| Post subject: | |
Mike, Measuring that way its 31 inches. At least thats what the Yukons are that I have. Sorry it took a while had to run out to the garage 
Hope that helps you some. Tom |
|
| Author: | Inc [ Tue Oct 20, 2009 12:25 am ] |
| Post subject: | |
tommudd wrote: Mike,
Measuring that way its 31 inches. At least thats what the Yukons are that I have. Sorry it took a while had to run out to the garage Hope that helps you some. Tom Well, the Yukon ones I have in my garage measure 29.75" and when the gear guys went to install my locker and 4.88s and those Yukons they said the shafts were too short. I believe the XJ 8.25 shafts are shorter than the KJ shafts and I have XJ shafts that need to be returned. This page says that Yukon shafts are 30 7/8". http://en.wikibooks.org/wiki/Jeep_Liber ... er_8.25%22 Oh, and thank you Tom. |
|
| Author: | tjkj2002 [ Tue Oct 20, 2009 12:48 am ] |
| Post subject: | |
There are many lengths for the 8.25 shafts. XJ.... 29-13/16 inches and 29 splines. 29-7/8 inches and 27 splines KJ.... 30-7/8 inches and 29 splines Dodge van... 32-5/8 inches and 27 splines Dodge 2wd truck/early Dakota.... 31-13/16 inches and 27 splines '97+ Dakota... 30-1/4 inches and 29 splines(right side) 33-3/8 inches and 29 splines(left side) |
|
| Author: | Inc [ Tue Oct 20, 2009 12:50 am ] |
| Post subject: | |
tjkj2002 wrote: There are many lengths for the 8.25 shafts.
XJ.... 29-13/16 inches and 29 splines. These appear to be the ones they sent me. Now the joy of returning an item bought on the net. 
Thanks for the info guys. |
|
| Author: | tommudd [ Tue Oct 20, 2009 6:34 am ] |
| Post subject: | |
The ones I have came out of Seths Green Machine so I assume they are the right ones (I hope) Maybe I measured wrong, have to redo today, they are 29 spline , already counted that |
|
| Author: | JJsTJ [ Tue Oct 20, 2009 8:16 am ] |
| Post subject: | |
tommudd wrote: The ones I have came out of Seths Green Machine so I assume they are the right ones (I hope) Maybe I measured wrong, have to redo today, they are 29 spline , already counted that
Correct Tom. THey were in Seths IFS KJ for a while so they gotta be the right ones. I know they wouldn't fit my XJ so thats why I sold them. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|