It is currently Sun Nov 01, 2026 6:36 pm

View unanswered posts | View active topics


Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » General Discussions

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
Inc
 Post subject: 8.25 Axle Shafts
PostPosted: Mon Oct 19, 2009 11:45 pm 
Offline
LOST Addict
User avatar

Joined: Tue Sep 05, 2006 10:38 pm
Posts: 5334
Location: Biggest Little City
Does anyone have the measurements of the stock 8.25 axle shafts? I need the length.

_________________
My Jeep Build ----> Big Black
Image
Top
 Profile  
 
tommudd
 Post subject:
PostPosted: Mon Oct 19, 2009 11:59 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
from the end of the stub to where?

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited
Top
 Profile  
 
Inc
 Post subject:
PostPosted: Tue Oct 20, 2009 12:04 am 
Offline
LOST Addict
User avatar

Joined: Tue Sep 05, 2006 10:38 pm
Posts: 5334
Location: Biggest Little City
I need the measurement jut like in the bottom illustration of this pic:

Image

Thank you.

_________________
My Jeep Build ----> Big Black
Image
Top
 Profile  
 
tommudd
 Post subject:
PostPosted: Tue Oct 20, 2009 12:10 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Mike,

Measuring that way its 31 inches. At least thats what the Yukons are that I have.

Sorry it took a while had to run out to the garage :wink:

Hope that helps you some.

Tom

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited
Top
 Profile  
 
Inc
 Post subject:
PostPosted: Tue Oct 20, 2009 12:25 am 
Offline
LOST Addict
User avatar

Joined: Tue Sep 05, 2006 10:38 pm
Posts: 5334
Location: Biggest Little City
tommudd wrote:
Mike,

Measuring that way its 31 inches. At least thats what the Yukons are that I have.

Sorry it took a while had to run out to the garage :wink:

Hope that helps you some.

Tom


Well, the Yukon ones I have in my garage measure 29.75" and when the gear guys went to install my locker and 4.88s and those Yukons they said the shafts were too short.

I believe the XJ 8.25 shafts are shorter than the KJ shafts and I have XJ shafts that need to be returned.

This page says that Yukon shafts are 30 7/8".
http://en.wikibooks.org/wiki/Jeep_Liber ... er_8.25%22

Oh, and thank you Tom.

_________________
My Jeep Build ----> Big Black
Image
Top
 Profile  
 
tjkj2002
 Post subject:
PostPosted: Tue Oct 20, 2009 12:48 am 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
There are many lengths for the 8.25 shafts.

XJ....

29-13/16 inches and 29 splines.
29-7/8 inches and 27 splines

KJ....

30-7/8 inches and 29 splines

Dodge van...

32-5/8 inches and 27 splines

Dodge 2wd truck/early Dakota....

31-13/16 inches and 27 splines

'97+ Dakota...

30-1/4 inches and 29 splines(right side)
33-3/8 inches and 29 splines(left side)
Top
 Profile  
 
Inc
 Post subject:
PostPosted: Tue Oct 20, 2009 12:50 am 
Offline
LOST Addict
User avatar

Joined: Tue Sep 05, 2006 10:38 pm
Posts: 5334
Location: Biggest Little City
tjkj2002 wrote:
There are many lengths for the 8.25 shafts.

XJ....

29-13/16 inches and 29 splines.


These appear to be the ones they sent me.

Now the joy of returning an item bought on the net. :roll:

Thanks for the info guys.

_________________
My Jeep Build ----> Big Black
Image
Top
 Profile  
 
tommudd
 Post subject:
PostPosted: Tue Oct 20, 2009 6:34 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
The ones I have came out of Seths Green Machine so I assume they are the right ones (I hope) Maybe I measured wrong, have to redo today, they are 29 spline , already counted that

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited
Top
 Profile  
 
JJsTJ
 Post subject:
PostPosted: Tue Oct 20, 2009 8:16 am 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 04, 2005 8:37 pm
Posts: 7928
Location: Big Bear & Lancaster, Ca.
tommudd wrote:
The ones I have came out of Seths Green Machine so I assume they are the right ones (I hope) Maybe I measured wrong, have to redo today, they are 29 spline , already counted that


Correct Tom. THey were in Seths IFS KJ for a while so they gotta be the right ones. I know they wouldn't fit my XJ so thats why I sold them.

_________________
99 TJ
71 C101
04 KJ
03 SFA KJ Sport
LOST JEEPS So-Cal


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » General Discussions

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com

Advertisements by Advertisement Management